Adding an Operator Job Aid

Adding an Operator Adding Operators Adding Device-specific Information: 1. Navigate to Operators > Management 1. From the tree, select the device type (e.g., Blood 2. On the tree, select All, then select Add. Gas,, etc.,) and then select the device model. 3. Enter the following for the operator: last name, 2. Locate the operator record by entering the operator's first name, operator ID, group, email address. last name or the Operator ID within the filter. 4. Select the device(s) the operator is authorized to 3. Only if needed, edit the automatically generated "ID on Device" or "Name on Device" fields. use. 5. Assign trainer and/or assessor rights, if applicable. 4. Update the operator's security access level for the 6. Select Apply. device. By default, the program assigns an operator the most restricted security access level. 5. Enter a device password and select Apply. 6. Blood gas operators have the option to use a single password for all RP400/405, RP500 and RL1200 devices. To enable this function, navigate to Operators > Administration, check the box, “Use a single password…” and select Apply. 7. To enter or edit a common password for an operator, navigate to Operators > Management. 8. From the tree, select Blood Gas. 9. Locate the operator record in the table. 10. Edit the password field then select Apply. GPE11001.008 Effective Date: 07/23/2014