RAPIDPoint 500e Blood Gas System Competency Checklist

Competency Checklist RAPIDPoint® 500e Blood Gas System Once an employee has acquired the necessary knowledge and skills to perform basic operation tasks this checklist can be used to observe the employee perform the required tasks for their core job responsibilities and to document demonstrated competency. The observer places their initials and date beside the task when it is performed successfully. Successful completion for each task is determined by the facility. The standards used to evaluate can be documented in the “Criteria” section below. Use the area on the last page to record comments or areas of improvement. If necessary, the observer can record recommended next steps of action for areas of improvement or development opportunities. When all required tasks are completed, the supervisor and employee sign and date this document as a record of completion. Criteria - Standards for successful completion of each task (e.g. Accuracy, Time, Quality, etc.): Observer’s Initials and Completion Date Topic/Tasks System Overview Identify hardware components and describe their function Identify replaceable components and their purpose Sign into the system Identify the areas of the Analysis screen Describe the main menus of the user interface Routine Operations Analyze a patient sample Review and evaluate patient results Recall patient results identify system messages and investigate Quality Control Analyze Required Quality Control Analyze Automatic Quality Control, if available Recall Quality Control results Calibration Perform a manual calibration Interrupt calibration to run a stat Routine Procedures Replace cartridges Remove and reinstall the AQC cartridge, if present Replace the printer paper Empty the ampule breaker, if present Replace the sample port Shutdown the system Effective Date: 31/Mar/2020 | HILS2111 SIEMENS siemens.com/healthineers Healthineers RAPIDPoint® 500e Blood Gas System | Competency Checklist Effective Date: 31/Mar/2020 |HILS2111 Observer’s Initials and Completion Date Topic/Tasks Maintenance Inspect/replace the filter Clean and disinfect the touch screen Clean and disinfect the exterior surfaces Calibrate the touch screen Siemens Healthineers Services Page 2 of 3 RAPIDPoint® 500e Blood Gas System | Competency Checklist Effective Date: 31/Mar/2020 |HILS2111 Comments Areas of Improvement Next Steps n Primary Operator n Secondary Operator has been trained on the above documented tasks Supervisor: Employee: Date: Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020