RAPIDPoint® 500e Blood Gas System Inspect and Replace the Filter Job Aid

Inspect and Replace the Filter RAPIDPoint® 500e Blood Gas System Refer to the Operator’s Guide when performing the following procedure. Routinely inspect the air filter and replace it if it is dusty or dirty. Depending on the level of dust and lint in the air where the system is being used, you may need to inspect the filter more frequently. Required Material: Air filter 1. The air filter and air filter carrier are located on the lower left side of the system when facing the back. Pull the air filter carrier out of the system O CE Unrestricted Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 SIEMENS Master Template Effective Date: 3/11/2019 | HOOD05162002998095 Healthineers Job Aid Effective Date: 30/Mar/2020 | HOOD05162003076203 Job Aid | Check and Replace the Filter Effective Date: 30/Mar/2020|HOOD05162003076203 2. Remove the filter from its carrier and inspect it. Install a new filter in the carrier if the current one is dirty or dusty 3. Reinstall the air filter carrier in the system @ 01040 olo Unrestricted Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Page 2 of 3 Job Aid | Check and Replace the Filter Effective Date: 30/Mar/2020|HOOD05162003076203 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. RAPIDPoint is a registered trademark of Siemens Healthcare Diagnostics. Copyright © Siemens Healthcare GmbH 2020 ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Unrestricted Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Page 3 of 3