Refreshing the Water Bath Additive on the Atellica® CH Analyzer Video Version 1.25 and Below

The Atellica Ch analyzer automatically refreshes the waterbath additive. The analyzer performs this activity in the daily and weekly Ch analyzer maintenance activities. This activity can also be run on demand as needed. To perform the procedure of refreshing the waterbath additive, manually, ensure the analyzer is in ready processing or standby state by selecting system in the software. Next, select status on the command bar. Select the Ch icon. Finally, review the status of the analyzer. To ensure the waterbath additive is on board, select inventory in the command bar. Next, select reagent overview to verify that water bath additive is on board. Next, select the maintenance tab. Select schedule. Select the module from the dropdown menu. Select refreshing the water bath additive. Select perform. Finally, select yes, wait for the maintenance procedure to complete. This completes the overview of refreshing the water bath additive.

Atellicae AtelLicae Solution Atellicae Solution Version 1. AtelLicae SIEMENS SIEMENS . Atellica Solution Version 1.14.0.2975003 Solution Version 1. sp00107 Version 1. 14.0.2983003 140.2983003 140.2975003 14.0.2975003 HeoLtnineers Healthineers HeoLtnineers•- Heoltnineers SIEMENS .. Healthineers System I ry Reagent Loader Reagent Loader Reagent Overview Operator Diagnostics Reagent Needs S Overview Reagent Lot Comparison Cal-QC Storage Needs 1M Modub: C-PI-05 Frequency: Al Al Performed By: All C-PI-05 Frequency: Al Al Performed By: All System c-P1-05 c.P1.05 c-P1-os Module Module Activity Scheduled Scheduled by Moheduled Reagents Reagent Overview Reagent Details Onboard calibration Calibration calibration cal Type QC Analyzer Reagents Reagent Inventory In ventory Sequence cal Eligibility Calfibrmation Status Interval In Use Status Standby Standby As Needed TSHWL 110 Capabilities p 102 003416 21dO3h 00682 00364 421dOh 00688 00683 73d23h Lot and Pack 13d22h Connected to FCC 21 doh 21dOh 111391 4 d Oh c-P1-os 73Od20h 42d23h 42d22h 125d13h 00368 00224 00688 00683 Odi.Oh 21dO'h Od0.1h C.P1-05 00688 00683 00692 00364 00368 00224 Odi.Oh the Dilution Wash Probe 1 As Needed c-P1-os C.P1-05 c-P1-05 05 125 d 13 h 007152 Front Cover Replachg the Dilution Wash Probe 2 3d5h 27 d lh Back Cover Front Cover The Water Bath Additive (WBA) is loaded and unloaded onto the system the same as all other reagents. The WBA will automatically be kicked off ot the system when the Onboard Stability and/or expiration date passes. Replaci•g Dilution Wash Probe 3yer I aRAVMA Group by reagent PEP rl PEP PE LabManager Wedneday, 2018 10:31 AM 2018 10:31 AM Tuesday, July 10.2018 Tuesday. July 10.2018