PEPconnect

Resolving Vacuum Leaks on the Atellica® IM Analyzer Job Aid Version 1.25 and Below

This job aid describes how to resolve vacuum leaks on the Atellica® IM Analyzer.

Atellica® IM Analyzer SIEMENS Healthineers Resolving Vacuum Leaks Job Aid Issue: Vacuum Out of Range Description: Waste vacuum out of range will stop the system. The waste bottles may or may not have liquid waste. Online Help Reference: Inspecting IM Waste Reservoirs for Vacuum Leaks 3 2 0 0 1 Troubleshooting Steps: 1. Open the water and liquid waste door 2. Locate the appropriate waste reservoir 3. Ensure that the reservoir is seated correctly, and that there is no strain on any of the tubing 4. Ensure that the cap is tight 7 6 5 1 Ensure the connections to that waste reservoir are secure Primary waste reservoir 5 Dryer 5. 2 Tertiary waste reservoir 6 Secondary waste reservoir 6. Close the door Water trap 7 Special reagent water w 7. If problem persists, contact the local technical support provider for assistance 4 Water and liquid waste door 1 Template Effective Date: 27-MAY-2019 | HOOD05162003010284 Effective Date: 11-OCT-2020| HOOD05162003129475 Unrestricted © Siemens Healthineers, 2020 SIEMENS Healthineers Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Atellica, and all associated marks are trademarks of Siemens Healthcare Diagnostics Inc. or its affiliates. All other trademarks and brands are the property of their respective owners. Product availability varies by country and is subject to varying regulatory requirements. Please contact your local representative for availability. Copyright © Siemens Healthcare GmbH 2020 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 2 siemens.com/healthineers Effective Date: 11-OCT-2020| HOOD05162003129475 Unrestricted © Siemens Healthineers, 2020