Sensis Vibe VD11 General Information Job Aid
This Job Aid provides general information about Sensis Vibe with the software version VD11 or higher.
SIEMENS Healthineers Sensis Vibe VD11 General Information Job Aid Template Effective Date: 01/08/2018| HOOD05162002751995 EEfffeeccttiivvee DDaattee::008/07/2020| HOOD05162003113426 4/ Unrestricted © Siemens Healthcare G mbH, 2019 General Information SIEMENS Healthineers Table of Contents Interval Timer 3 Bar Code Reader 5 Sedation Assessment 6 Export Waveform Data 7 Filtering Events & Totals 8 Miscellaneous 9 Maintenance 10 SIEMENS Note: The product and/or features here mentioned may not be commercially available in all countries. Due to regulatory reasons their future availability cannot be guaranteed. Please contact your local Siemens Healthineers organization for further details. 2 Effective Date: 08/07/2020| HOOD05162003113426 Unrestricted © Siemens Healthcare GmbH, 2019 General Information SIEMENS Healthineers Interval Timer The interval timer provides the ability to display, document and Q Ctrl + Q vents Results report certain events which are important in your clinical Pre Cath Data Summary Performing Physicians Vital Signs | Heart Rate : 60 [ bpm ] procedures. Personnel Event Type : Door time 1 Case Times Comment : 1 Patient/Procedure Status Vital Signs | Heart Rate : 60 [ bpm ] | NBP : _ /_ /_ [ mmHg ] Select and trigger the start of the interval timer 2 The timer will appear below the vital signs and cannot be moved to another area on the LIVE display NBP Sp02 % Multiple interval calculations can be configured by your System Administrator. The system defaults are: 2 Select to add settings Door to Balloon • “Procedure Time“ 1 • “Door to Balloon“ End Trigger: min Only one interval timer can be shown on the LIVE display. Interval Name Start Trigger End Trigger Timer Needed ? Procedure Time Access addressed Case end C Door to Balloon Door time Balloon inflated Note: Update/delete will impact related earlier studies resulting in data loss. Please exercise caution. Interval 3 Timer Effective Date: 08/07/2020| HOOD05162003113426 Unrestricted © Siemens Healthcare GmbH, 2019 General Information SIEMENS Healthineers Interval Timer Multiple interval calculations can be configured by your System Configure Interval Calculation Select to add settings Administrator. The system defaults are: “Procedure Time“ Interval Name: • Start Trigger: End Trigger: • “Door to Balloon“ Add Cancel Only one interval timer can be shown on the LIVE display Interval Name Start Trigger End Trigger Timer Needed ? M Procedure Time Access addressed Case end Door to Balloon Door time Balloon inflated Note: Update/delete will impact related earlier studies resulting in data loss. Please exercise caution. Interval 4 Timer Effective Date: 08/07/2020| HOOD05162003113426 Unrestricted © Siemens Healthcare GmbH, 2019 General Information SIEMENS Healthineers Bar Code Reader Catno. The bar code reader provides for fast and accurate Catéter guia / Game .. What is the GS1 standard bar code? Cateter -Guia / Styricalen 778- 190-00 REF / Cat. No. documentation and tracking of your inventory. The GS1 Identification System provides two types of Use By identifiers. The first or primary identifiers are called ---- 770- 180-00 16 --- CF Cordis Cordis • Sensis supports scanning of GS1 standard bar GS1 Keys like the Global Trade Item Number (GTIN) or Cordis codes. 2 183-2671-2 /0848 Cordis Global Location Number (GLN). Additionally the GS1 • When the consumable item (e.g. catheter) bar Indentification System provides Key “attributes“ like code is scanned, Serial number (SERIALNR), Lot Lot numbers or Expiration Dates. number (LOTNO), and Expiration date (EXPIRY) are In the barcode example : auto populated in the respective fields of the • (01) Is a GTIN (product ID) “08717648“ identifies Abbott, the CaseLog event. remaining digits indentifies the product uniquely • (17) Is the expiration date using the format YYMMDD “January REF 1003377-13 [LOT 1022141 > 2013-01 31, 2013“ • (10) Is the lot number “1022141“ (01)08717648035142(17) 130131(10) 1022141(91)3057 • (91) Is the company internal identification number “3057“ Always use the product bar code which provides this information. Bar Code General 5 Reader Info: Bar Code Effective Date: 08/07/2020| HOOD05162003113426 Reader Unrestricted © Siemens Healthcare GmbH, 2019 General Information SIEMENS Healthineers Bar Code Reader The bar code information is displayed in the fields of Equipment × 180 the CaseLog event as defined in the database group. Event Time 09:32:53 Include In Report 160 140 Equipment Category Lot No F Super Sheath w/Wire 10/11 Sheath 1023232 120 100 Please contact your System Administrator if any Serial No Expiry 80 1231231 23/12/2022 60 further changes are needed. 40 Comments 20 Show Equipment Summary O Save Cancel Ò Q Ctrl + Q Events Results Event Summary . Time Equipment | 6F Super Sheath w/Wire 10/11 | Lot No: 1023232 | Serial Number: 1231231 | Expiry: 23/12/2022 9:32:53 AM Personnel | John |Function: Additional Personnel: 9:31:48 AM Vital Sign Alarm Settings| Alarms/Type : Active/Adult | HR : On:On:45:120 [ bpm ]| SpO2 : Off [ % ]| Resp : Off [ breaths/min ]| 9:28:44 AM Condition Changed 9:28:43 AM on New Condition| Name : Rest 9:28:43 AM Bar Code General 6 Reader Info: Bar Code Effective Date: 08/07/2020| HOOD05162003113426 Reader Unrestricted © Siemens Healthcare GmbH, 2019 General Information SIEMENS Healthineers Sedation Assessment The term Aldrete Score was replaced by Vital Signs Settings X Sedation Assessment X Vital Signs Alarms Sedation Assessment in the user interface Setting for current examination Time 3:29:22 PM Sedation Assessment Effective directly when pressing OK. Consciousness Logging Parameters Aldrete Score Skin Color is replaced by O2 HR (averaged) SpO2 Respiration NBP Respiration rate Saturation M IBP M EtCO2 IBP Channel 02 Saturation 2 = Maintains >92% on room air . P1 . P2 @ P3 . P4 • When Vital Signs Event is created, prompt for : 1 = Need O2 inhalation to maintain O2 2: Maintains > 92% on room air • Consciousness Muscle Function Pain Score 1: Need O2 inhalation to maintain > 90% saturation >90% Respiration Circulation 0: < 90% despite supplemental 02 CTTCUTALTOIT 02 Saturation Sedation Assessment • 0 = < 90% even with supplemented O2 Log interval (min) 10 min Sedation Assessment NBP For the current examination, use: Pain Score O NBP neonatal mode NBP adult mode Note that you should not use NBP adult mode on neonates or patients who weigh less than 8.2 kg (18 pounds). Respiration Rate Source OK Cancel No breath timeout For neonatal For adult 30 s License to use for calculating respiration rate CO2 Module ECG Respiration o CO2 Module O Lead | O Lead Il OK Cance Sedation General 7 Assessment Information Effective Date: 08/07/2020| HOOD05162003113426 Aldrete Score Unrestricted © Siemens Healthcare GmbH, 2019 General Information SIEMENS Healthineers Export Waveform Data Export Waveform Data is available for Hemodynamics, Electrophysiology and Post Processing applications. • When the waveform is loaded into Review, selecting the „Export Waveform Data“ function opens the Export dialog where you can enter a description, set start time and stop time plus add other available waveforms from the waveforms list. • After clicking Export, the Save As dialog is displayed. Choose a name and if necessary a destination for the .txt file. The file contains the waveform data with the corresponding properties (e.g. recorded date and time, number of signals, range or sensitivity). Export Waveform Data X Export Waveform Data X 18.07.24-15_48_44-STD-Coronary Diagnosti_18.07.24-15_48_44-STD-126.96.36.199.1188.8.131.52.10000398_2018.7.24_15-58-40.txt - Notepad File Edit Format View Help Description: Create Event Snapshot Description Snapshot Start Time! Description : Snapshot 2012.7.24-15:56:44 Update Event Stop Time: Start time: Stop time: 4:31:50 PM 2012.7.24-15:57:12 4:31:22 PM Number of Signals! 4 Print Estimated file size: 0.96 MB Save As X Sampling rate:2860 [Signal Properties] Export Waveform Select Waveforms for Export Save in : CDR_OFFLINE Units: For Pressures [mmHg] For electrograms [pv], where ipV - 8.80lmv Available waveforms ncluded waveforms Name Date modified Signal sequential number: No items match your search. 1;2;3;4; Caliper aVR Recent Places Signal label: 1;11;111;A0; aVL Filter [Hz] : aVF P1:AO 280;200;260; 15; V1 High: Autospace V2 Desktop 0.85;8.65;8.85;8; V3 [Data] V4 - -13;-23;-6;101.4; -13;-22;-7;101.3; -15;-22;-8;101.3; V5 Libraries -16;-22;-9;101.3; -17;-22;-9;181.2; V6 -18;-22;-10;101.2; Display Waveforms ... -18;-22;-18; 101. 1; QRS -17;-21; -9;101.1; STIM -16;-20;-9;181.1; Computer -15;-19;-8;181.8; -13;-18;-7;101.0; Manage View .. Pleth -12;-17;-6;180.9; dP1/dt:AO -11;-16;-5;100.9; -11;-15;-5;180.9; -11;-15; -5;100.8; -11;-15;-5;180.8; Network -12;-17;-5;180.8; -14;-19;-6;100.7; -17;-23;-8;180.7; Export Waveform Data -19;-27;-9;100.7; -21;-30;-18;180.6; -22;-32;-10;100.6; File name 12.2.1184.108.40.206.79980_2018.7.24_16-33-36 Save -22;-33;-18; 180.5; -22;-33;-10;160.5; -20;-31;-10; 100.5; Export Save as type: *. txt Cancel -19;-29; -9;180.5; Cancel -17;-26;-8;100.5; -14;-22;-7;180.4; Export General 8 Waveform Info: Export Effective Date: 08/07/2020| HOOD05162003113426 Data Waveforms Unrestricted © Siemens Healthcare GmbH, 2019 General Information SIEMENS Healthineers Filtering Events & Totals The possibility to filter by one or multiple interval Events Results Event: Condais Changed Summary O Recycle Bin O Allergies: Time events and totals makes it easier to structure the study Condition Changed 9: 14:54 AM O Case Times Condition Changed 2 Condition Changed 9:10:24 AM and find specific events. Condition Changed FFR 11:26:42 AM Condition Changed O LOG Score Pre 11:05:09 AM Pre Cath Data Condition Changed New Condition 11:03:04 AM Condition Changed O Performing Physicians 11:01:34 AM Clear All q, Ctrl + Q Events Results Event FFR, Resting Pipa Summary # FFR Time FFR | FFR : 0,96 | P1;Pa : [ LAD P : 91 ] [ mmHg ] | P2.Pd : [ LAD D : 88 ] [ mmHg ] | (Pa-Pd) LOC Score Pre 2 32:12 PM Resting Pd'Pa | Rest PdiPa Value : 0.96 | P1:Pa : [ RCA P : 91 ] [ mmHg ] | P2:Pd : [RCAD : 8 New Condition O Performing Physicians 2:26:16 PM D Printout Pre Cath Data Printout 2 Resting Pd/Pa Vital Sign Alarm Setti. Clear All Q. Ctrl +Q Events Result Event Summary O Recycle Bin Time Allergies | Sudafed | Type of Reaction; hives Allergies 9 19:58 AM Allergies | Penicillin | Type of Reaction: hives Case Times 0 Condition Changed 9:19:49 AM Allergies | Dairy | Type of Reaction: nausua O FFR 9:19:35AM Allergies | Codeine _ | Type of Reaction: O LOC Score Pre 9:19:27 AM Pre Cath Data O New Condition O Performing Physicians Clear All Filtering 9 Events & Effective Date: 08/07/2020| HOOD05162003113426 Totals Unrestricted © Siemens Healthcare GmbH, 2019 General Information SIEMENS Healthineers Miscellaneous 12 lead ECG printout includes Heart Rate (HR) NBP button indicates status of repeated Vital Sign activation SIEMENS 1. Ruhe:12 Lead ECG 3:36:21 PM-6 $ Sensis Vibe VD11A Vital Signs 10 mmimv LLE !11 0 mm/mv A 111 aVR 10 mm/my START Recording NBP Repeated On/Off Lavif 10 mmmy V2 10 mm.my 1 Vs 10 mm/my Ctrl+Q shortcut in QuickAdd edit box V5 10 mm/my V6 10 YnmimV Q Ctrl + Q Events R Summary: 60HR 18.07.24-15:26 ... 18.07.24-15:26:39-S ... Study: Koronar Diagnostisch Date: 7/24/2018 Pre Cath Data Summ Miscellaneous 10 Effective Date: 08/07/2020| HOOD05162003113426 Unrestricted © Siemens Healthcare GmbH, 2019 General Information SIEMENS Healthineers Maintenance Sensis is a server/client based product. For the overall Main Menu: Options > End Session health of the system performance, it is recommended HemoBox to: End Session X • perform a controlled shut down of the system at This will end your session Normal least once per week Forced perform a controlled shut down whenever you have Logoff Shut down Reset HemoBox Cancel • experienced power outage ComboBox End Session X Ensure the studies are closed before performing any Shutdown System shut down Reset ComboBox Power Off ComboBox Power On ComboBox Maintenance 11 Effective Date: 08/07/2020| HOOD05162003113426 Unrestricted © Siemens Healthcare GmbH, 2019 SIEMENS Healthineers Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH Global Siemens Healthineers Headquarters Henkestr. 127 91052 Erlangen, Germany Phone: +49 9131 84 0 siemens.com/healthineers 12 Effective Date: 08/07/2020| HOOD05162003113426 Unrestricted © Siemens Healthcare GmbH, 2019
- sensis vibe