Single Monitor Set-up (XA30)

This e-clip provides an overview about the single-monitor set-up.

In general, either a single or dual monitor concept is realized at the acquisition workplace. The Dual monitor layout best supports parallel handling of examination via the Left Monitor and evaluation related workflows via the right monitor. The single monitor layout is used, for example, if only limited space is available. The single monitor layout combines the applications used for examination and evaluation by applying foreground background screen functionality. The patient tabs displayed on the upper edge of the monitor allow toggling between the different applications to differentiate between patient tabs of the examination screen and of them are view and go. The Patient tab is characterized by a special icon including scanner, an patient. You can find controls such as help, collaboration, configuration, Job view and capture tools in the titlebar. The status bar is located at the bottom right of the screen. Independent of your monitor setup, you can access the scheduler and the local database by two keys from the keyboard. The symbols on the keys are aligned with the symbols on the screen.

patient tab,patient,view,monitor,examination,screen,single,applications,evaluation,keys,symbols,operator manual,siemens healthineers,operator,manual,siemens,optional,hereinafter,collectively,country,training,material,general,configuration,software,hardware,information,spine,part,present

SIEMENS •1 00 02:12 Single-monitor @ Siemens Healthcare GmbH, 2020 For the proper use of the software or hardware, please always use the Operator Manual or STU,' Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator [0 set-up Manual. Any material used in this training will not be updated on a regular basis and does not 00 necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety •1 information like warnings and cautions. 10 I-spine I -Spine Dot Engine Note: Some functions shown in this material are optional and might not be part of your system. The information in this material contains general technical descriptions of specifications and options as The reproduction, transmission or distribution of this training or its contents is not permitted without well as standard and optional features that do not always have to be present in individual cases. express written authority. Offenders will be liable for damages. Certain products, product related claims or functionalities described in the material (hereinafter All names and data of patients, parameters and configuration dependent designations are fictional collectively "Functionality") may not (yet) be commercially available in your country. Due to and examples only. regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current All rights, including rights created by patent grant or registration of a utility model or design, are information. reserved.