SOMATOM go. platform Changing a Scan Range Name Video (VA20)
This video provides instructions on how to change a scan range name when operating a SOMATOM go. platform scanner. Note, this training reflects software version VA20. Disclaimer: Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. Functionalities described in the material or parts of this functionality may not yet be released for customers and not yet be commercially available in every country. Due to regulatory requirements, the future availability of said functionalities or parts thereof in any specific country is not guaranteed. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients and institutions that are used in these instructions for use are entirely fictional. Any resemblance to names of existing people or organizations past or present is entirely coincidental. All parameters and images shown in this online training are examples. Only the parameters displayed by your system are definite. Configuration-dependent designations, such as names of drives, network nodes, and databases, that are used in these instructions are usually not the same as the designations to be found on a particular installation of the system in a clinical environment. All rights, including rights created by patent grant or registration of a utility model or design, are reserved.
The name of a scan range can be changed if desired. This movie will show you the steps for how to change a scan range name for this simulation. We will begin by changing the name of the first scan range. Navigate to the timeline and right click the scan range you wish to change the name 4. A context menu opens from the context menu, select show parameters. The parameters toolbar will display above the timeline. The scan range name can be found under the scan favourites Tab and is located here. Notice the color of the box for the field corresponds with the scan range color on the timeline as well as in the task flow control area and the Recon ranges areas. For this simulation, the first scan range name will be changed from thorax to inspiration and the second scan range name will be changed from thorax to expiration. Modify the scan range name as appropriate by selecting the field and typing the scan range name. Once changed, the scan range named Field will turn green and the scan range name in the task flow control Area, Timeline and Recon Ranges area will have updated. Notice if you hover over the scan range on the timeline, the window will display the current scan range name. The same procedure was followed to change the second scan range name to expiration. Notice the color of the box field corresponds with the scan range color on the timeline and all scan range names were updated to expiration. Congratulations, you have completed this exercise.
context menu,scan range,field corresponds,recon ranges,scan,field,changed,show,change,simulation,timeline,display,notice,color,expiration,updated,completed,recon,thorax,congratulations,exercise
SIEMENS scan 4 Recon O Thorax (Adult) Recon Ranges Insøration Congratulations. You nave completed this exercise. Check ci Scan I Scan Acquisition mAs Actwate eee 8.1