PEPconnect

SOMATOM go. platform Patient Positioning Video

This video demonstrates how to position a patient when operating a SOMATOM go. platform scanner.

Press the footswitch to move the patient table up. To move the patient table down. Press the footswitch again. Position the patient head in a head. Hold around a patient table. On the remote scan control, press the load button and tell you the table has reached the desired position. Press the unload button to move the table out and down. Position the patient on the patient table. Placed the head in the head arm. Support in the knee. Support under the knees. The patient should grip the head arms support with both hands. Move the patient table in the gantry by pressing the load button on the remote scan control. Press the unload button to move the table out and down. To position the thorax in the isocenter, move the patient table into the gantry and adjust the patient position with the laser markers. When performing a feetfirst thorax scan, the patient should not be placed too close to the other end of the table. Otherwise the scan rage cannot cover the entire thorax area. When performing feetfirst, thorax can try to place the patient as close as possible to the inner end of the table.

SIEMENS . SIEMENS Healthineers • Healthineers SOMATOM go. Please note that the Learning material is for training purposes only! Please note that the learning material is for training purposes only! Patient positioning For the proper use of the software or hardware, please always use the Operator Manual or instructions For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used Uideo Feet first thorax Head first thorax SIEMENS . SIEMENS in this training will not be regular basis and not reflect the latest version of in this training wiLL not be updated on a regular basis and does not necessarily reßect the Latest version of in this training will not be updated on a regular basis and does not necessarily reßect the latest version of the software and hardware available at the time of the training. The reproduction, transmission or distribution of this training or its contents is not permitted without Head first - acquisition - Head first thorax Positioning in isocenter Patient load and unload express written authority. Offenders will be liable for damages. The Operator Manual shall be used as your main reference, in particular for relevant safety information Healthineers • LikéW67iifngs and cautions. like warnings and cautions. Adequate patient Patient too far up in the with the foot switch * head acquisition with lasers acquisition All names and data of patients, parameters and configuration dependent designations are fictional and examples only. Note: Some functions shown in this material are optional and might not be part of your system. position Adequate scan range. Patient ready Table reached maximum position, scan range table Certain products, product related claims or functionalities described in the material (hereinafter collectively AIL rights, including rights created by patent grant or registration of a utility model or design, are too short. Patient requires re-positioning for scan *optional "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, reserved. the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. Copyright O Siemens Healthcare GmbH, 2020 Copyright O Siemens Healthcare GmbH, 2020

  • somatom go.
  • somatom go
  • somatom
  • somotom
  • somatom go. up
  • somatom go.now
  • patient
  • positioning