PEPconnect

Spin Echo with Flow Compensation

This job aid will go over the Spin Echo flow compensated sequence.

Spin Echo with Flow Compensation Job Aid The Spin Echo sequence is available for both 1.5 and 3 Tesla systems. This sequence is typically used for pre and post contrast T1 weighted head imaging. Dot Cockpit - Main Explorer Program Editor Browse mport Export Edit Simulate SIEMENS » head > library > T1 t1 tse_sag_p2_180mm_2mm 03:10 t1_f12d_sag_2mm 02:50 head Brain Dot Engine t1_se_sag 02:28 clinical libraries advanced applications libraries transverse GOBrain library t1_tse_dark-fluid_tra_p2 03:18 t1_f12d_tra 01:19 T1 t1_f12d_tra_3mm 03:01 PD+T2 04:02 3D t1_tse_tir_tra diffusion t1_tse_r_tra_p2 03:01 perfusion BOLD t1_se tra 04:26 BLADE t1_se_17rb130_tra SWI 04:26 flow Head32 QUIET t1_se_tra_blood-suppr. 04:26 StarVIBE SyMRI t1_tse_dixon_tra_3mm 03:53 MRF t1_tse_fs_tra_3mm 03:16 › angiography angiography ce t1_tse_tra_3mm 02:06 › c-spine 03:53 › t-spine t1_tse_r_tra_2mm SIEMENS >> head >> library >> T1 >> t1_se_17rb130_tra ? x General @ 4:26 min @ 0.4x0.4x4.0 mm3 @ 1.00 Protocol Parameters Routine Contrast Resolution Geometry System Physio Inline Sequence Voice Commands Execution Part 1 Part 2 Assistan Image Management Sequence Name se_ Bandwidth 130 Hz/Px Auto Load Copy References Flow Compensation On OK Cancel Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 SIEMENS Master Template Effective Date: 05 MAR 2020 | HOOD05162003074494 Job Aid Effective Date: 10 SEP 2020 | HOOD05162003091643 Healthineers Job Aid | Spin Echo with Flow Compensation Effective Date: 10 SEP 2020 | HOOD05162003091660 |US 1/18/2021 HOOD05162003145310 There are two flip angles available for the Spin Echo flow compensated sequence. You can optimize each of these two flip angles. However, Siemens recommends that the second excitation or (flip angle) is modified to one 150 degrees to provide better control of the RF energy and to help reduce SAR. SIEMENS >> head >> library >> T1 >> t1_se_17rb130_tra X General @ 4:26 min + Auto 0.4x0.4x4.0 mm3 ~ 1.00 Protocol Parameters Routine Contrast Resolution Geometry System Physio Inline Sequenc Voice Commands Execution Common Dynamic Image Management TR 600.0 - ms Fat-Water Contrast Standard Auto Load TE 17.00 ¢ ms Copy References TD 0.00 - m MTC Magn. Preparation None Flip Angle 1 Reconstruction Magnitude Flip Angle 1: 90 Flip Angle 1 150 deg 50 Flip Angle 2: deg 130 deg OK Cancel SIEMENS Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Master Template Effective Date: 05 MAR 2020 | HOOD05162003074494 Job Aid Effective Date: 10 SEP 2020 | HOOD05162003091643 Healthineers Page 2 of 3 Job Aid | Spin Echo with Flow Compensation Effective Date: 10 SEP 2020 | HOOD05162003091660 |US 1/18/2021 HOOD05162003145310 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively ‘Operator Manual’) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively ‘Functionality’) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH 2020 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Phone: +49 9131 84-0 siemens-healthineers.com SIEMENS Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 Master Template Effective Date: 05 MAR 2020 | HOOD05162003074494 Job Aid Effective Date: 10 SEP 2020 | HOOD05162003091643 Healthineers Page 3 of 3