Stratus® CS Acute Care™ Diagnostic System Competency Checklist

Stratus® CS Acute Care™ Diagnostic System Competency Checklist Once an employee has acquired the necessary knowledge and skills to perform basic operation tasks this checklist can be used to observe the employee perform the required tasks for their core job responsibilities and to document demonstrated competency. The observer places their initials and date beside the task when it is performed successfully. Successful completion for each task is determined by the facility. The standards used to evaluate can be documented in the “Criteria” section below. Use the area on the last page to record comments or areas of improvement. If necessary, the observer can record recommended next steps of action for areas of improvement or development opportunities. When all required tasks are completed, the supervisor and employee sign and date this document as a record of completion. Criteria - Standards for successful completion of each task (e.g. Accuracy, Time, Quality, etc.): Observer’s Initials and Completion Date Topic/Tasks System Overview Identify the system hardware components Differentiate the functionality of the system hardware components and consumables Navigate through the software Daily Setup Check and replace the supplies as needed Perform the System Check Review Reagent Status Sample Processing Explain Sample Handling and Reagent Storage Distinguish between various tube types and sample types Identify the steps to process a sample Review reports and explain the results Recognize when and how to process a dilution sample Calibration Identify when to perform calibration Perform calibration Delete a calibrated TestPak lot Evaluate a calibration report Resolve basic calibration failures Quality Control Process quality control Review the quality control report Maintenance Perform standard maintenance Perform monthly maintenance Troubleshooting Troubleshoot error codes Quality # HILS1932 Effective Date: 06/09/2017 Page 1 of 2 SIEMENS Healthineers siemens.com/healthineers Stratus® CS Acute Care™ Diagnostic System Competency Checklist Comments Areas of Improvement Next Steps  Primary Operator  Secondary Operator has been trained on the above documented tasks Supervisor: Employee: Date: Quality # HILS1932 Effective Date: 06/09/2017 Page 2 of 2 SIEMENS Healthineers siemens.com/healthineers