Switching Between MAX Wi-D and MAX Mini Detector

This SBS will help users move easily between different wireless detectors

MAX: Switching between MAX Wi-D and MAX Mini Detector XPRF 1. To change detectors via the MAX-Touch, select the detector Icon, located on the right side of the screen. The detector Image with the handle at the top represents the MAX Wi-D. O nm Cu O mm Cu cy, 11 + + pen IEN SUPINE Switch between active detectors for free exposure  Detector selection not available on touch + V screen with the Fusion MAX system. 2. To change Detectors via the Fluorospot Compact when an “X OGP View” is selected, click on the detector Icon to the left of the “Exam Manager” Icon. Then select the desired detector. uGym2 Patient Patient 0 0 uGym2 0.00 10.00 W ABDOMEN DECUB WV ABDOMEN DECUB X ABDOMEN SUPINE X ABDOMEN SUPINE X ABDOMEN 0-3yrs (8-14cm) X ABDOMEN 0-3yrs (8-14cm) C ------ HE Examination Select the portable detector to use for Examination free acquisition Detector 1339D1 16.9 "1 x 16.9 " Detector 133908 Postpro 8 59.1" Current Target Note: In the scenario where an “X OGP View” is selected and both the MAX Wi-D and MAX Mini are attached to the system, it is important to verify which detector is selected prior to making the exposure. Keep in mind, if the MAX Wi-D is in a bucky when an “X OGP View” is selected the MAX Mini will be the default. If the MAX Mini is not active/attached, the MAX Wi-D will be the default. SIEMENS Healthineers Job Aid | Switching between MAX and Mini Detector Effective Date: 09/12/2018 | Quality HOOD05162002948845 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 Siemens Healthineers Services Page 2 of 2 © Siemens Healthcare GmbH, 2017