PEPconnect

syngo Dynamics VA40 Report Designer Delta Online Training - USA

This online training module will introduce you to the new features and feature improvements available in Report Designer with syngo Dynamics VA40.  

Continue Continue Report Designer syngo Dynamics VA40 Report Designer Delta Online Training This online training module will introduce you to the new features and feature improvements available in Report Designer with syngo Dynamics VA40. Master Template HOOD05162003052540 | Effective Date: 26-Nov-2019 Conditional Field Display 1 Aggregate Functions 2 Welcome Audio Filename: sd_va40_report-designer_welcome.mp3 Audio Script: Welcome to the syngo Dynamics VA40 Report Designer Delta Online Training. This online training module will introduce you to the new features and feature improvements available in Report Designer with syngo Dynamics VA40. Upon successful completion of this module, you will be familiar with the new options available within Report Designer. Please note that this Online Training module should not be seen as a replacement to onsite application training. This training serves as a preparation to your onsite applications training. Let’s get started. Report Designer The Report Designer application allows you to create, modify, and customize your own worksheet and report templates. In this module you will be introduced to the new features and feature improvements of Report Designer in VA40. Please note: This module does not replace the Report Designer Course. Report Designer Guided Reporting: Conditional Field Display The new Parent/Child editor allows you to design a worksheet template that hides the display of a ‘child’ field in a worksheet until a value for the ‘parent’ field is specified. Guided Reporting: Conditional Field Display New Parent/Child Editor Applies across the entire template bundle Supported in: Sections Study Tables Pop-Up Buttons Tabs Conditional Field Display Video Conditional Field Display Video Audio Filename: sd_va40_report-designer_conditional-field-display.mp3 Audio in Video: To enable Conditional Field Display in the worksheet, ensure that it is configured in the worksheet properties. Select File, Worksheet Properties. Check that the Conditional Field Display check box is selected. Conditional Field Display gives you the ability to design a worksheet template that hides the display of a ‘child’ field on the worksheet until a value for the ‘parent’ field is specified. Conditional Field Display is supported within Sections, Study Tables, Pop Up Buttons, and Tabs. Conditions are defined in the new Parent/Child Editor that has been added to the Libraries Menu. Configurations made in the Parent/Child editor apply across the entire template bundle. The Parent/Child Summary Report displays a summary of all the defined parent/child relationships. New equation terms for calculations: ctxmax() ctxmin() ctxmean() ctxsum() ctxcount() Aggregate Functions sd VA40A Aggregate Functions.mp4 Aggregate Functions Audio Filename: sd_va40_report-designer_aggregate-functions.mp3 Audio in Video: In VA40, new equation terms for calculations have been added. Aggregate functions provide you with the ability to compute a maximum, minimum, mean, sum or count of a measurement or calculation within a data context set. Aggregate functions help to improve report efficiency and data accuracy. Additionally, clinical insights and research capabilities are enhanced. Course Review Congratulations. You have completed the syngo Dynamics VA40 Report Designer Delta Online Training. Select the objectives listed below to review the material before proceeding to the final assessment. Additionally, a full course review is available in the Resources tab. 1 1 1 Conditional Field Display 2 Aggregate Functions Course Review Aggregate Functions Aggregate functions provide you with the ability to compute a maximum, minimum, mean, sum or count of a measurement or calculation within a data context set. New equation terms for calculations have been added for calculation within a data context set: ctxmax() ctxmin() ctxmean() ctxsum(), and ctxcount() Conditional Field Display The new Parent/Child Editor enables you to configure worksheet conditional field display settings. Conditional Field Display gives you the ability to design a worksheet template that hides the display of a ‘child’ field on the worksheet until a value for the ‘parent’ field is specified. Conditions are defined in the new Parent/Child Editor that has been added to the Libraries Menu. Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH 2020 Siemens Healthineers Headquarters / Siemens Healthcare GmbH / Henkestr. 127 / 91052 Erlangen, Germany Telephone: +49 9131 84-0 / www.siemens-healthineers.com Disclaimer Disclaimer Assessment This assessment will test your retention of the presented content. A passing score of 80% or higher is required to complete the course and earn your certificate. You may repeat the assessment as many times as needed. Start Assessment Aggregate Functions Soft Template Check-in Conditional Field Display In Report Designer, which new feature could you use to reduce entries shown on your Worksheet template? Question 1 of 5 Select the best answer. Question 1 Incorrect Incorrect Soft Template Check-in describes the process of checking in templates. Correct Aggregate Functions compute a maximum, minimum, mean, sum or count within a data context set. To design a Worksheet template that displays all fields at all times. To design a Worksheet template that hides the display of a ‘child’ field on the Worksheet until a value for the ‘parent’ field is specified. To design a Worksheet template with mandatory fields. What does Conditional Field Display give you the ability to do? Question 2 of 5 Select the best answer. Question 2 Incorrect Conditional Field Display does not cause fields to be mandatory. Incorrect Correct Conditional Field Display does not display all fields at all times. Worksheet Properties Template Properties There is no setting to enable Conditional Field Display. Where do you enable Conditional Field Display to appear in the Worksheet? Question 3 of 5 Select the best answer. Question 3 Incorrect You enable Conditional Field Display in the Worksheet Properties. Incorrect You enable Conditional Field Display in the Worksheet Properties. Correct Phrase Library Parent/Child Editor You can only use factory delivered default values. Where do you configure Conditional Field Display? Question 4 of 5 Select the best answer. Question 4 Incorrect It is possible to configure Conditional Field Display values. Incorrect Correct You configure phrases in the Phrase Library. Compute a maximum, minimum, mean, sum or count of a measurement or calculation within a data context set. Compute a mean measurement or calculation within a data context set only. Compute a maximum measurement or calculation within a data context set only. What do aggregate functions allow you to do? Question 5 of 5 Select the best answer. Question 5 Incorrect You can compute a maximum, minimum, mean, sum or count of a measurement or calculation within a data context set. Incorrect You can compute a maximum, minimum, mean, sum or count of a measurement or calculation within a data context set. Correct Review Review Retry Assessment Results %Results1.ScorePercent%% %Results1.PassPercent%% Continue YOUR SCORE: PASSING SCORE: Assessment Results You did not pass the course. Take time to review the assessment then select Retry to continue. Congratulations. You passed the course. Exit To access your Certificate of Completion, select the Launch button drop down on the course overview page. You can also access the certificate from your PEPconnect transcript. You have completed the syngo Dynamics VA40 Report Designer Delta Online Training. Completion HOOD05162003098149 | Effective Date: 10-JUN-2020 Course Review 1.1 Welcome 1.2 Report Designer 1.3 Guided Reporting: Conditional Field Display 1.4 Conditional Field Display Video 1.5 Aggregate Functions 1.6 Course Review 1.7 Disclaimer 1.8 Assessment 1.15 Completion

  • report designer