syngo Dynamics VA40 Corner Menus

Tools are available in the top right and bottom right of the image. The tools remain hidden unless you move your mouse cursor over them. Move your mouse to the top right of the image to display the measurement tools. When you move your cursor over the icon, the tooltip appears. The measurement tools available depend on the image type. For example, for XA images only the 2D distance Measurement tool is available. If you are reviewing an ultrasound image, the calc palette icon will also appear with the measurement tools. You can also open the calc palette using the icon in the toolbar. Image tools are in the bottom right of every image. Move your mouse over the lower right of the image to display the image tools. Here you will find tools for image display and post processing. The image tools available depend on the image type. For example, Edge enhancement is only available for XA images and the calibration tool only appears if the image was not previously calibrated. To adjust the image window values, click on the icon in the image toolbar. The window level box is displayed. You can adjust the values in the box. To apply the newly defined settings to all images, select apply all. You can also use your mouse to adjust the image window level brightness and contrast display after selecting the window level icon. When you move your cursor over the image the mouse changes. Press and hold the left mouse button and move the cursor over the image to adjust the window values. To return to the original window level values, click on the default button. Please note your window level adjustments are temporary. The default image window values will return to the original values when the study is closed.

O. TX power Power us 0.4 Med R dB SIEMENS . THI 37 THI 37 MHz 37 MHz @ Siemens Healthcare GmbH, 2021 42 fps 36 bpm Certain products, product related claims or functionalities described in the material (hereinafter collectively Please note that the learning material is for training purposes only! Healthineevs ' "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Corner Menus Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used local Siemens Healthineers sales representative for the most current information. as training material only and shall by no means substitute the Operator Manual. Any material used in this The reproduction, transmission or distribution of this training or its contents is not permitted without training will not be updated on a regular basis and does not necessarily reflect the latest version of the express written authority. Offenders will be liable for damages. software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like All names and data of patients, parameters and configuration dependent designations are fictional and warnings and cautions. examples only. Level All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Note: Some functions shown in this material are optional and might not be part of your system. to AX AX to