Sysmex® CS-2500 System Competency Checklist

Sysmex® CS-2500 System Competency Checklist Once an employee has acquired the necessary knowledge and skills to perform basic operation tasks this checklist can be used to observe the employee perform the required tasks for their core job responsibilities and to document demonstrated competency. The observer places their initials and date beside the task when it is performed successfully. Successful completion for each task is determined by the facility. The standards used to evaluate can be documented in the “Criteria” section below. Use the area on the last page to record comments or areas of improvement. If necessary, the observer can record recommended next steps of action for areas of improvement or development opportunities. When all required tasks are completed, the supervisor and employee sign and date this document as a record of completion. Criteria - Standards for successful completion of each task (e.g. Accuracy, Time, Quality, etc.): Observer’s Initials and Completion Date Topic/Tasks System Overview Identify major hardware components Distinguish between the different detection methods Describe the sample processing sequence Navigate the software Identify pre-analytical checks Reagent Management Identify key areas of the Reagent screen Load reagents Identify reagent messages Enter reagent lot information for new lots Sample Processing Identify the areas of the Order screen Process samples using a host computer and manual order entry, barcoded and non-barcoded samples Identify and resolve common sample processing errors Result Management Identify key areas of the Joblist screen Locate sample results Interpret sample flags Print sample results Calibration Identify information on the applications sheet Input reagent information Setup and run a calibration, using the C rack Review, validate and print calibration curves Enter the ISI and normal values for the PT assay Quality Control Processing Perform the steps to process Quality Control samples Identify key areas of the QC Chart screen Identify how to manage Quality Control results Maintenance Perform daily maintenance Perform weekly maintenance Page 1 of 2 Quality # HILS1910 Effective Date: 08/29/2018 SIEMENS siemens.com/healthineers Healthineers Sysmex® CS-2500 System Competency Checklist Perform monthly maintenance Perform as needed maintenance Add user defined maintenance items Coagulation Curve Errors Describe the multi-wavelength detection system Navigate to the Joblist browser screen Identify the analysis data errors Identify corrective actions Comments : Areas of Improvement: Next Steps: n Primary Operator n Secondary Operator has been trained on the above documented tasks Supervisor: Employee: Date: Page 2 of 2 Quality # HILS1910 Effective Date: 08/29/2018 SIEMENS siemens.com/healthineers Healthineers