Sysmex® CS-2500 System Result Management Online Training

Welcome to the Sysmex® CS-2500 System Result Management Online Training. System software provides: Viewing sample results Sample volume check Multi-wavelength pre-analytical check (HL) View and print coagulation curves Print sample results Locate sample results Identify key areas of the Joblist screen Interpret sample flags Upon successful completion of this course you will be able to: Congratulations. You have completed the Sysmex CS-2500 System Result Management Online Training course. Listed below are the key points that have been presented. Take the time to review the material before you proceed to the final quiz. Identify key areas of the Joblist screen and operation buttons Display Area             Sample information             Sample results             Pre-analytical flags             Error Messages             Reaction curves   Operation panel             Order Entry – used to manually enter sample information             Browser – used to display analysis results in a graph form                      Find – used to locate sample results             Mark – used to highlight multiple samples             Print – used to print single or multiple sample results Interpret sample flags Sample Volume check flags             Displays on the Joblist as [ Vol ]             Pre-analytical check             Under and over filled sample check             Ensure proper anticoagulant ratio   Sample HL check flags             Pre-analytical multi-wavelength check             User-defined criteria of results             Optimal wavelength utilized for results               Hemolysis             Displays on the Joblist as [ Hem ] or [ H* ]               Lipemic             Displays on the Joblist as [ Lip ] or [ L* ] Explain how to locate sample results Find in the operation panel of the Joblist screen Ways to search:             Sample number             Rack number             Patient name Describe how to print results Printing a single result Highlight a sample Select Print Select Cursor Data Select Format (Graph or List) Select Print Printing a batch of results Select Mark Select sample results to print Select Print Select Marked data Select Format (Graph or List) Select Print   Sysmex CS-2500 System software Joblist screen includes: Sample information Sample results Pre-analytical flags Error messages Reaction curves Navigating the Joblist Screen Learn about the Joblist screen.   Locating sample results on the Joblist by: Sample number Rack number Patient name   Locating Sample Results Learn about locating sample results. Checklist TitleChecklist TypeChecklist ContentJoblist ScreenHTML Select Find in the operation panel on the Joblist to locate sample results. Ways to SearchHTML Select a search key: Sample No. Rack No. Patient Name Up or DownHTML Search Up or Search Down is used depending on where the cursor is on the Joblist. Search ResultsHTML When a line matching the criteria is found, the cursor moves to that line. If there is not matching lines, a warning dialog box is displayed. Printing results from the Joblist includes: Printing a single result Printing multiple results utilizing Mark on the operation panel   Printing Results Learn about printing results on the Joblist screen. Checklist TitleChecklist TypeChecklist ContentHighlight a Single SampleHTML Highlight a single sample in the Joblist screen to print.  Mark Multiple SamplesHTML Highlight multiple samples on the Joblist screen utilizing Mark on the operation panel. The operation panel changes to mark mode: Current: adds or clears a mark to or from the selected line Same Date: marks all lines with the same analysis date as the selected line All: marks all lines displayed in the list Release all: clears all the marks Back: mark mode ends and the operation panel returns to normal mode ​Note: In mark mode, the analysis result list is not updated until you exit mark mode. Select PrintHTML Select the print button located in the operation panel of the Joblist screen. Select Print FormatHTML Target Data: Cursor Data: print the result line currently selected Marked Data: print the currently marked result lines Format: The highlighted sample can be printed in Graph or List format Select PrintHTML   Select Print after selecting the appropriate Target Data and Format. Sysmex CS-2500 System pre-analytical sample flags displayed on the Joblist include: Vol Sample volume check Hem Hemolysis check Lip Lipemia check H* Influence of an inhibitor prevented a hemolysis check L* Influence of an inhibitor prevented a lipemia check   Sample Volume Flags Learn about sample volume flags on the Joblist screen.   HL Flags Learn about HL flags on the Joblist screen.   Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions.   Note: Some functions shown in this material are optional and might not be part of your system.   Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country.  Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information.   The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages.   All names and data of patients, parameters and configuration dependent designations are fictional and examples only.   All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Sysmex and all associated marks are trademarks of Siemens Healthcare Diagnostics Inc., or its affiliates. All other trademarks are the property of their respective owners.   Copyright © Siemens Healthcare GmbH 2019 Please proceed to taking the course assessment.