Sysmex® CS-5100 System Result Management Online Training*
Locating, interpreting and identifying sample results with in the system software. Understanding pre-analytical sample integrity checks to ensure accurate patient results. This clinical laboratory training qualifies for continuing education units (CEU). *U.S. specific content.
Welcome to the Sysmex® CS-5100 System Result Management online training. System software provides: Viewing sample results View and print coagulation curves Select Next to continue Select Next to continue. Describe how to print results Explain how to locate sample results Identify key areas of the Joblist screen and operation buttons Locate and view sample flags Upon successful completion of this course you will be able to: Congratulations. You have completed the Sysmex® CS-5100 System Result Management Online Training course. Listed below are the key points that have been presented. Take the time to review the material before you proceed to the final quiz. Identify key areas of the Joblist screen and operation buttons Display Area Sample information Sample results Error Messages Reaction curves Operation panel Order Entry – used to manually enter sample information Browser – used to display analysis results in a graph form Find – used to locate sample results Mark – used to highlight multiple samples Print – used to print single or multiple sample results Explain how to locate sample results Find button in the operation panel of the Joblist screen Ways to search: Sample number Rack number Patient name Using the wild card to search An asterisk (*) can be placed in front or behind a string of numbers The asterisk (*) represents any numbers in front or behind the numbers entered Example 8* would result in anything starting with 8 (81, 8135, 8343, etc) Describe how to print results Printing a single result Highlight a sample Press Print Select Cursor Data Select Format (Graph or List) Press Print Printing a batch of results Press Mark Select sample results to print Press Print Select Marked data Select Format (Graph or List) Press Print Select Next to continue. Sysmex® CS-5100 System software Joblist screen includes: Sample information Sample results Error messages Reaction curves Navigating the Joblist menu Learn about the Joblist screen. Instructions:If media does not automatically start, select the play arrow to begin.Flash File:/content/generator/Course_90014062/sim_CS51_RsltMgt_JoblistNav3_800x640/sim_CS51_RsltMgt_JoblistNav3_800x640/sim_CS51_RsltMgt_JoblistNav3_800x640.htmHTML5 File:/content/generator/Course_90014062/sim_CS51_RsltMgt_JoblistNav3_800x640/sim_CS51_RsltMgt_JoblistNav3_800x640/index.htmlPDF File: Locating sample results on the Joblist by: Sample number Rack number Patient name Locating sample results checklist Learn about locating sample results. Checklist TitleChecklist TypeChecklist ContentJoblist ScreenHTML Use the Find button located in the operation panel on the Joblist to locate sample results. Select each checkbox to learn more about locating sample results. Ways to SearchHTML Select a search key: Sample No. Rack No. Patient Name Up or DownHTML Search Up or Search Down is used depending on where the cursor is on the Joblist. Wild CardHTML An asterisk (*) can be used as a wild card when entering numerical text. For example if sample number 9* is entered, any sample number beginning with 9 will be located on the Joblist. Search ResultsHTML When a line matching the criteria is found, the cursor moves to that line. If there is not matching lines, a warning dialog box is displayed. When complete, select the X in the upper-right corner to close the window and continue. Printing results from the Joblist includes: Printing a single result Printing a batch of results Printing a single result on the joblist Learn about printing a single result. Checklist TitleChecklist TypeChecklist ContentHighlight SampleHTML Highlight a single sample in the Joblist screen to print. Select each check box to learn more about how to print a single sample result from the Joblist. Press PrintHTML Press the print button located in the operation panel of the Joblist screen Select FormatHTML Target Data: Make sure 'Cursor Data' is selected to print a single sample result. Format: The highlighted sample can be printed in Graph or List format. Press PrintHTML Press Print after selecting the appropriate Target Data and Format. When complete, select the X in the upper-right corner to close the window and continue. Printing a batch of results on the joblist Learn how to print a batch of results. Instructions:If media does not automatically start, select the play arrow to begin.Flash File:/content/generator/Course_90014062/sim_CS51_RsltMgt_PrintBatch5_800x640_US/sim_CS51_RsltMgt_PrintBatch4_800x640_US/sim_CS51_RsltMgt_PrintBatch4_800x640_US.htmHTML5 File:/content/generator/Course_90014062/sim_CS51_RsltMgt_PrintBatch5_800x640_US/sim_CS51_RsltMgt_PrintBatch4_800x640_US/index.htmlPDF File: