PEPconnect

Transmit Receive Coils (E-line) Step by Step

Transmit Receive Coils (E-line) Step by Step

Transmit Receive Coils (E-line) There are 3 different coils offered on E-line. 1. TxRx CP Head Coil  The spine coil is Removed. The table pads are positioned on the pt table.  Connect the coil plug to Socket 1 (1) (2) (3) (4) (1) Releases (1) (2) Upper part of coil (5) (3) Mirror (4) Center marking (6) (5) Lower part of coil (6) Cable fixation 2. Tx Rx 15ch Knee Coil  Used to scan Rt or Lt knees  The spine coil stays on the table  The coils is connected to the system using the Tim Coil Interface. (for this coils you need 2 Interfaces) (1) (1) Release (2) Upper part of the coil (3) (3) (3) Recess for Tim Coil Interface (4) Coil plug (5) Release for the coil (6) Lower part of the coil (6) (5) (4) (4) Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 SIEMENS Master Template Effective Date: 3/5/2020 | HOOD05162003074494 Job Aid Effective Date: XX/XX/XXXX | HOOD/HILS Healthineers Job Aid | Transmit Receive Coils (E-line) Effective Date: 04/13/20 | HOOD05162003079523 3. TxRx CP Extremity Coil  Is used for examing knee joints and foot/ankles  This coil is available on 1.5T MR systems  The coils uses 1 Tim Interface  The spine coil stays on the table (3) (2) (4) (1) Recess for Tim Coil Interface ( 1) (2) Center marking (3) Release (4) Upper part of the coil (5) (5) Lower part of the coil  Here are the Tim Coil Interface To connect the coil: Slide the socket cover of the Tim Coil Interface with the coil plug away and connect the plug to the socket. To remove the coil: Use the release on the Tim Coil Interface. 4 To remove the Tim Coil Interface: Grasp the housing and lift it up vertically. Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 SIEMENS Master Template Effective Date: 3/5/2020 | HOOD05162003074494 Job Aid Effective Date: XX/XX/XXXX | HOOD/HILS Healthineers Page 2 of 3 Job Aid | Transmit Receive Coils (E-line) Effective Date: 04/13/20 | HOOD05162003079523 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH 2020 Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 SIEMENS Master Template Effective Date: 3/5/2020 | HOOD05162003074494 Job Aid Effective Date: XX/XX/XXXX | HOOD/HILS Healthineers Page 3 of 3