PEPconnect

TX/RX Head Coil: Operation with Spine Coil Removal Step by Step

TX/RX Head Coil: Operation with Spine Coil Removal Step by Step

TX/RX Head Coil: Operation with Spine Coil Removal syngo MR Systems with E-line or Numaris X Software 1. Utilization of the TX/RX (Transmit/Receive) Head Coil requires removal of the spine coil during setup 2. Remove any coils or pads at head of table 3. Lift up the cushion flap at the base/foot of the spine coil to locate plug and coil release 4. Underneath the handle the release can be pressed towards the magnet bore. 5. While pressing this release, lift lever release (2) up and towards magnet to release the table from the coil plugs (3) 6. With lever up, slide coil towards magnet bore to remove coil from grooves. 7. Use carrying handles (1) on side to lift and remove spine coil from table 8. DO NOT store coils upside down or on plugs as it (3) may damage coil/plugs (2) Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 SIEMENS Master Template Effective Date: 3/5/2020 | HOOD05162003074494 Job Aid Effective Date: XX/XX/XXXX | HOOD/HILS Healthineers Job Aid | TX/RX Head Coil: Operation with Spine Coil Removal Effective Date: 05/07/2020 | HOOD05162003086712 9. Slide the coil guides located on each side of the oil into the front lateral recesses of the head end of the patient table 10. Place pads on table and utilize dedicated head cushion in lower part of coil Head-Spine table pad Head cushion (1) (2) 11. Locate the Plug stored in the Cable Fixation (6) and plug (3) (4) into Coil Socket 1 (1) (5) 12. Press Releases (1) on both sides simultaneously and lift (6) Upper Part of Coil (2) up 13. Position patient in Lower Part of Coil (5) 14. Place Upper Part of Coil (2) back on and make sure it is secure 15. Align laser-light for positioning to Center Marking (4) of coil 16. Utilize Mirror (3) attachment as necessary 17. Send patient into bore for scanning Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 SIEMENS Master Template Effective Date: 3/5/2020 | HOOD05162003074494 Job Aid Effective Date: XX/XX/XXXX | HOOD/HILS Healthineers Page 2 of 3 Job Aid | TX/RX Head Coil: Operation with Spine Coil Removal Effective Date: 05/07/2020 | HOOD05162003086712 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH 2020 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Phone: +49 9131 84-0 siemens-healthineers.com Unrestricted 0 Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2020 SIEMENS Master Template Effective Date: 3/5/2020 | HOOD05162003074494 Job Aid Effective Date: XX/XX/XXXX | HOOD/HILS Healthineers Page 3 of 3