UniPOC™ Data Management System Manage Reports Job Aid

UniPOC™ Data Management System SIEMENS Healthineers Manage Reports REPORTS: Main Hospital > ER >> All Locations 1 Test Data Reports View Available Reports Audit Trail Log Comment Code Log Control Data Statistics Control Outlier Log Invalid Patient - LIS 1. On the Reports screen, select the report category 2 Levey-Jennings Graph by Control Lot Levey-Jennings Graph by Reagent Lot • Test Data Reports Linearity Graph Patient Outlier Log • Operator and User Reports Patient Summary Refresh Hide CREATE REPORT: Main Hospital >> ER >> All Locations Patient Value Distribution Tree Options • Instrument Reports QJ Representative by Instrument & Reagent Organization CONTROL OUTLIER LOG Repeated Test H Main Hospital • epoc Reports Test Data Listing ER 3 1 East The Control Outlier Log provides a tabular display of control test results outside the control or reagent lot's specified range. I-STAT Reports 1 West • Operator and User Reports REPORT LOCATION IT Department 2. Select the report Deployment Main Hospital >> ER >> All Locations P Lab 5 Instrument Reports REPORT OPTIONS 1st Floor • Select > to display any sub-reports Nursery Report Comment • Customized reports display as sub-reports under 3 West Test Date Range Period Today V epoc Reports H West Clinic From 04/09/2018 To 04/09/2018 the parent report selected Instrument Type i-STAT Reports Instrument 3. Select a Facility, Department or Location in the Tree 4 Reagent Type to customize the report for a specific location Reagent Lot Control Lot 4. On the Create Report screen, select any desired Analytes Operators filters under Report Options 5. Select View to preview the report 5 View E-Mail Save Cancel 6. Utilize the Report toolbar to view, navigate, print and export reports 1 of 2 - Whale Page + 5 8 5 o Note: Refer to the UniPOC User Manual for additional information on individual report types. 1 Effective Date: 12-Jul-2021 | HOOD05162003201651 Note: The epoc Reports category will only be visible if the epoc instrument driver is installed on the system. Unrestricted © Siemens Healthineers, 2021 UniPOC™ Data Management System SIEMENS Healthineers Manage Reports Create a Custom Report Tree Options Refresh Hide CREATE REPORT: Main Hospital > ER > 1 East Organization H Main Hospital CONTROL OUTLIER LOG Create Report screen allows users to customize and save reports that ER include selected: 1 East The Control Outlier Log provides a tabular display of control test results outside the control or reagent ot's specified range. 1 West REPORT LOCATION • Report Location IT Department Deployment P Main Hospital > ER > 1 East Lab • Report Options 3 1st Floor REPORT OPTIONS Nursery Report Comment 3 West Test Date Range Period Today 1. On the Reports screen, select the report category H West Clinic From 04/09/2018 To 04/09/2018 2. Select the report to be customized Instrument Type X CLINITEK Status Plus 3. Select a Facility, Department or Location in the Tree to customized Instrument X CLINITEK Status Plus 10321 - Reagent Type X CLUNITEKStatusPlus the report for a specific location AND/OR select available Report Reagent Lot Options Control Lot Analytes • Report Options include filter and date range options Operators 4. Select Save 4 5. Enter a Report Name View E-Mail Save Cancel 6. Select Save • The report is listed as a sub-report under the default report name Save Report Enter the report name you wish to save this report as. It will appear as a sub-report on your Reports dashboard. Any other sub-report with this name will be overwritten. Note: Refer to the UniPOC User Manual for additional information 5 Report Name on individual report types. 6 Save Cancel 2 Effective Date: 12-Jul-2021 | HOOD05162003201651 Unrestricted © Siemens Healthineers, 2021 SIEMENS Healthineers Please note that the learning material is for training purposes only. For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Please note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. UniPOC and all associated marks are trademarks of Siemens Healthcare Diagnostics Inc., or its affiliates. All other trademarks are the property of their respective owners. © Siemens Healthcare GmbH 2021 Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 3 siemens-healthineers.com Effective Date: 12-Jul-2021 | HOOD05162003201651 Unrestricted © Siemens Healthineers, 2021