PEPconnect

XPRF Fluoro Systems Configuration and Use of CARE position

This video covers the steps for setting up and using CARE Position on the Fluoro
Systems.

In this video you will learn how to configure and use care position on your fluoro system. Care position is radiation free positioning via graphic display of the field of view. In the last image hold. This option is only available together with care profile option. The care position function makes it possible for you to reposition the patient without further fluoroscopy. The duration of The display can be configured in the user settings under examination properties. Since care position comes with care profile, the duration for both is controlled with one setting. Collimator display 0 means the graphic is off 1 to 10 seconds can be configured with 10 seconds being the typical default. Once the time is configured, choose apply and OK. Then exit the user settings. To turn the graphic on or off per exam, press set up on the touch screen and choose the care position icon. This button can be configured to always be on with a new patient, always off with a new patient or remain in the same state as the last patient exam performed. For this configuration, please contact Seaman service. To use care position during an examination, press the care position icon on the touch screen to the on position. Release fluoroscopy when system movement is initiated. The care position graphic displayed as a plus or cross is updated whenever the position of the system is changed either by table or X Ray beam movement. With the next fluoro or acquisition the new centering position is applied. In this video you have learned how to configure an use care position. For more information, please refer to the operator manual for your fluoro system.

Auto reference Mode Properties Patient Name Patient Name Patient ID Date of Birth Sex Examination Date Date of Birth Sex Stu Descri tion Ward p Fla CARE Date of Birth Sex Stu CARE Auto Shutter DFR — 0.0" Z! #16.5x13.8" SIEMENS .. Z! # Enable auto shuner fluoro e Delete Image Display 16.5X13.8" Descri tion Auto Shutter Fluoro p Fla u Descri tion Ward Date MField display Healthineers USER SETTINGS r Enable for DFR/RAD images Acquisition Position. DICOM Delta Y Collimator Display 15 Order USER SETTINGS sec Fluoro Barium BW Fluoro Barium Singleshot BW Eluoro Barium Singleshot BW Barium Singleshot BW quisition. Auto Crop Auto zoom auto DICOM Examination Site Info Exam Manager Setup Image Display Image Image Tools Tools Tools Setup Mode Image Too's Properties Display dose Enable auto zoom Properties Dose level Enable auto shunter fluoro DICOM Delta Y Site Info Exam Manager Learning Objective: earning Objective: Examination XPRF Fluoro Systems: Image Display 85 ratient, CARE 15 0.2 0.0 70.0" Auto reference Properties Sensitivity (speed) SIEMENS Acquisition Patient, of CARE Position SIEMENS .. , fonfiguring and UtilizinÅ CA E 1 mm Cu Configuring and Utilizing CARE I mm co mm Configuration and Use Enable for DFluoro images Enable for Fluoro images Heat unit Test 0.0 aeoo Order quisition. Dose level tion r for DFR/RAD images r Enable for DFR/RAD images 30 of CARE Position Enable Test Healthineers Image Delete quisition. Patient pls pols Auto reference CARE Order Registrati... Patient Image Delete Image Display Acquisition Position. Patient 0.0" DVO Recording 85 15 Auto zoom Delta Y Order Registrati... 0.0 Registrati... 2:20 minutes 0.0" MField display Enable Test A' 110 Collimator Display sec auto CARE Film segmentation DVD Recording Enable auto zoom Enable for DFluoro images Display dose sec Display dose Based on XPD1-325.620.01.01.02 and Auto reference Enable selection on touch screen CARE r Enable for DFR/RAD images Dose level XPD3-520.621.01.01.02 FD in parking position Radiation activated OK Sensitivity (speed) Apply Cancel Enable selection on touch screen Collimator Display Radiation activated Heat unit Test MField display sec

  • Fluoro
  • CARE