Ysio Fully Automated: Tomography Acquisition

Ysio Fully Automated: Tomography Acquisition step by step

Ysio Fully Automated: Tomography Acquisition Radiography 1. Open a patient exam and select a P_TOMO pro- TOMO . TOMO gram in the Examination Mode. 111111111 Patient T ABDOMEN SUPINE P. IVP TOMO 6 P. TVP TOMO 7 P MVP TOMO 8 2. Select the appropriate tube arc and speed for the ostproce examination. 401 - 2.5s 60 3. Select the measured fulcrum height for the anatomy. 4. Press the OGP move button to move the tube into position over the table. TABLE MUST BE LOW ENOUGH FOR 45 INCH (115CM) SID, IF NOT, TUBE WILL NOT MOVE. 5. Align anatomy into the collimated field. 6. Press and hold the acquisition button to acquire the tomogram. Tomographic images are indicat- ed by this symbol on the image. RAD TH: 90 mm Read o.p. SIEMENS Healthineers Job Aid | Ysio Fully Automated: Tomography Acquisition Effective Date: 8/23/2016 | 527 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 Siemens Healthineers Services Page 2 of 2 © Siemens Healthcare GmbH, 2017