ADVIA Centaur® XP Immunoassay System Quality Control Online Training

La fonction d'étalonnage rétrocal devient active quand une nouvelle cartouche mesure est installée ou si certaines substances perturbatrices sont détectées. Lorsque l'une de ces circonstances se produit, l'analyseur a besoin de ces étalonnages supplémentaires pour corriger la dérive du capteur. Le système reste en étalonnage rétrocal jusqu'à 7 heures après l'installation d'une nouvelle cartouche de mesure. Il y a 3 façons pour savoir si l'analyseur est en étalonnage rétrocal : Il faut 2 minutes pour obtenir un résultat au lieu de 1 minute. Le bouton ETALONNAGE dans l'écran d'Etat indique Redem. Cart. Les cases jaunes n'apparaissent pas avec les paramètres dans l'affichage des résultats. Welcome to the ADVIA Centaur® XP Immunoassay System Quality Control course. In this course you will learn about the procedures for defining QC, processing QC samples and for reviewing and managing QC data. Understanding these quality control procedures will help you verify your system's performance.  Select Next to view the course objectives. Describe how to define QC Describe how to review QC Data Explain how to schedule QC List the steps to create and schedule QC Test Profiles List the steps to edit a QC Definition After completing this course, you will be able to: Select Next to continue. Dans cette section, vous apprendrez tout sur les composants matériels de l'analyseur Rapidpoint ® 400/405. Vous en saurez également davantage sur les fonctions de ces composants. Congratulations you have completed the ADVIA Centaur® XP Quality Control Online Training course.  Listed below are the key points that have been presented.  Take time to review the material before you proceed to the final quiz.  In this online training course, you have learned to: Describe how to define QC Expected values for QC material are entered in the Control Definition screen.  Select Add to define a new control. List the steps to edit a QC Definition QC ranges are updated by selecting the Control Definition option in the Quality Control menu.  After you are in the Control Definition screen, select Edit and changes values as needed. Explain how to schedule QC QC is ordered in the Worklist Schedule screen.  Select the Control radio button, the assays and levels of QC.  QC can be processed with or without barcodes and on multiple lots of reagent. List the steps to schedule and create QC Test Profiles QC test profiles are ordered in the Worklist Schedule window.  Select the Control radio button, select the appropriate profile and levels of control. Profiles are created in the Profile Summary screen.  This screen is accessed from the Setup menu. Describe how to review QC Data Quality Control results are viewed in the Worklist Summary.  Any assay that exceeds the expected values is flagged with an "Out" message. Select Next to continue. Après la collecte et le mélange, l'échantillon est prêt pour l'analyse. Dans cette section, vous apprendrez comment effectuer l'analyse de l'échantillon sur le système RAPIDPoint®. Quality Control Definition: Enter and edit QC ranges using the Quality Control task button 50 tests per control can be defined 300 controls can be defined 10 lots of data for each test/control combination can be stored Note: It is recommended that you evaluate each new lot of QC material before placing it into routine use.   Create a QC Definition Learn how to create a QC definition. Checklist TitleChecklist TypeChecklist ContentSelect Control DefinitionHTML Select Control Definition from the Quality Control menu. Note:  The system should be in the Ready state before this procedure is started. Select each checkbox to learn about how to create a QC definition.  Select AddHTML   Select Add from the Control Definition screen.  Enter Control InformationHTML   Enter name of the control, type, lot number, expiration date and SID.  Select the Test ButtonHTML   Select the Test button.  Select a TestHTML    Choose a test from the menu and select Continue.  Enter the Expected ValuesHTML   Enter the expected values - mean and 2SD or low and high range. You can use the QC material product insert ranges or your established laboratory ranges. Select Save Test.  Select SaveHTML   Select Save. When complete, select the X in the upper-right corner to close the window and continue.    Edit a QC Definition Learn how to edit a QC definition. Checklist TitleChecklist TypeChecklist ContentSelect Control DefinitionHTML   Select Control Definition from the Quality Control menu. Note:  The system should be in the Ready state before this procedure is started. Select each checkbox to learn about editing a QC definition.  Select ControlHTML   Select the control and lot number.  Select EditHTML   Select Edit from the Control Definition screen.  Select a TestHTML   Choose a test in the table.  Edit the Expected ValuesHTML   Edit the expected values - mean and 2SD or low and high range. Select Save Test.  Select SaveHTML Press Save.  Delete a QC DefinitionHTML   Delete a QC definition by selecting the Delete button at the bottom of the Control Definition screen. When complete, select the X in the upper-right corner to close the window and continue.    Defining QC Practice defining QC. Instructions:If media does not automatically start, select the play arrow to begin.Flash File:/content/generator/Course_90003334/sim_CXP_CreateQCDefinition_training800X622_9/sim_CXP_CreateQCDefinition_training800X622_9.swfHTML5 File:/content/generator/Course_90003334/sim_CXP_CreateQCDefinition_training800X622_9/index.htmlPDF File: Schedule QC: In the Worklist Schedule window With and without barcodes On multiple reagent lots Two levels of QC must be processed on each day that samples are analyzed.  QC samples must also be processed when a 2-point calibration is performed. Scheduling QC with Barcodes Learn how to schedule QC with barcodes. Checklist TitleChecklist TypeChecklist ContentSelect ScheduleHTML Select Schedule from the Worklist menu. Select each checkbox to learn how to schedule QC with barcodes.  Select ControlHTML   Select the Control radio button.  Select TestsHTML   Select the appropriate tests.  Select QC LevelsHTML   Select levels of QC and select Save. When complete, select the X in the upper-right corner to close the window and continue.    Scheduling QC without Barcode Learn how to schedule QC without a barcode. Checklist TitleChecklist TypeChecklist ContentSelect ScheduleHTML Select Schedule from the Worklist menu. Select each checkbox to learn how to schedule QC without barcodes.  Select ControlHTML   Select the Control radio button.  Select Schedule by RackHTML   Select Schedule by Rack.  Select TestsHTML Select the appropriate tests.  Select QC LevelsHTML    Select the levels of QC, enter Rack ID and position and press Save. When complete, select the X in the upper-right corner to close the window and continue.    Schedule QC on Multiple Reagent Lots Learn how to schedule QC on multiple reagent lots. Checklist TitleChecklist TypeChecklist ContentSelect ScheduleHTML Select Schedule from the Worklist menu. Select each checkbox to learn how to schedule QC on multiple reagent lots.  Select ControlHTML Select the Control radio button.    Select TestsHTML Select the appropriate tests.  Select QC LevelsHTML Select the levels of QC and select Reagent Options.  Select Reagent LotHTML Select a reagent lot from the Lot dropdown menu and press Continue.  Select SaveHTML Note the diamond symbol next to ThCG that indicates that reagent options have been scheduled. Select Save. Repeat these steps to schedule additional lots of the same reagent. When complete, select the X in the upper-right corner to close the window and continue.   Test profiles: Allow you to schedule multiple tests for a QC samples Are ordered in the Worklist Schedule Are created by using the Setup task button   Schedule QC Test Profiles Learn how to schedule a QC test profile. Checklist TitleChecklist TypeChecklist ContentSelect ScheduleHTML Select Schedule from the Worklist menu. Select each checkbox to learn more about scheduling QC test profiles.  Select ControlHTML Select the Control radio button.  Select Test ProfileHTML Select the appropriate test profile on the right side of the Worklist Schedule window.  Select QC LevelsHTML Select QC levels and press Save. When complete, select the X in the upper-right corner to close the window and continue.   Create a QC Test Profile Learn how to create a QC test profile. Checklist TitleChecklist TypeChecklist ContentSelect Profile SummaryHTML Select Profile Summary from the Setup menu. Note: The system must be in Ready and you must be signed in at Level 1 to complete this process. Select each checkbox to learn more about how to create a QC test profile.  Select Add Test ProfileHTML Select Add Test Profile.  Enter Profile InformationHTML Enter the profile name, LIS code, select assays and select Save.  Select CloseHTML Select Close.  Review Test ProfileHTML Observe the test profile you just created in the profile list. When complete, select the X in the upper-right corner to close the window and continue.   Create a QC Test Profile Practice creating a QC test profile. Instructions:If media does not automatically start, select the play arrow to begin.Flash File:/content/generator/Course_90003334/sim_cxp_QCTestProfile_training800x622_9/sim_cxp_QCTestProfile_training800x622_9.swfHTML5 File:/content/generator/Course_90003334/sim_cxp_QCTestProfile_training800x622_9/index.htmlPDF File: You have just learned how to schedule QC.  Select the link below to practice what you have learned.   Your Turn Practice scheduling QC. Instructions:If media does not automatically start, select the play arrow to begin.Flash File:/content/generator/Course_90003334/sim_CXP_ScheduleQC_training800x637_9/sim_CXP_ScheduleQC_training800x637_9.swfHTML5 File:/content/generator/Course_90003334/sim_CXP_ScheduleQC_training800x637_9/index.htmlPDF File: A luz da lâmpada de halogêneo é transmitida através de filtros sobre o disco de filtros de multi-comprimentos criando 5 comprimentos de onda diferentes. Os 5 comprimentos de onda da luz são transportados para a unidade de Detecção, sendo usados para determinar a leitura de teste de coagulométricos, cromogênico e imunológicos. Alguns ensaios são configurados com um comprimento de onda primária e secundária, para um melhor resultados final. Reviewing QC results Access Worklist Summary and select the Controls view QC that falls outside of the expected values will be flagged with the message "Out" QC can be rescheduled by selecting the result and pressing the Repeat button Reviewing QC Results Learn about reviewing results. Checklist TitleChecklist TypeChecklist ContentSelect SummaryHTML Select Summary from the Worklist menu. Select each checkbox to learn more about reviewing QC results.  Select Controls ViewHTML   Select the Controls view from the View dropdown menu.  Observe FlagsHTML If the QC was out of range, an “Out” flag would appear on the right side of the result.  Reschedule QCHTML   If necessary, you can reschedule QC from the Worklist Summary window. Highlight the result to be rescheduled and press Repeat.  Review Statistics and GraphsHTML You can review QC graphs and statistics in the ADVIA® QC software. To access the software, press the QC button on the keyboard or QC Exception status button on the workspace.  Open ADVIA® QCHTML   If the ADVIA® QC software is not open, select the Quality Control button and then select ADVIA QC.  Review ADVIA® QCHTML   From this window you can access QC results, graphs, statistics and reports. Refer to the Introduction to ADVIA® QC online training course for more information. When complete, select the X the upper-right corner to close the window and continue.   Reviewing QC Results Practice reviewing QC results. Instructions:If media does not automatically start, select the play arrow to begin.Flash File:/content/generator/Course_90003334/sim_CXP_ReviewQC_training800x622_9/sim_CXP_ReviewQC_training800x622_9.swfHTML5 File:/content/generator/Course_90003334/sim_CXP_ReviewQC_training800x622_9/index.htmlPDF File: