CLINITEK Novus® Analyzer Removing the SG Sensor

completed the proper steps in diagnostics, open the cover and locate the SG well behind the right corner of the card platform. Select next remove the SG sensor by holding down the sensor well lever and pulling the SG sensor out. Then select next. Unhook the SG sensor cables from the clips on the wall of the system. And then select next. Locate the five color coded SG sensor connectors to the left and above the card platform. Remove the connectors by pushing the connector down, turning the collar counterclockwise. 1/4 turn and lifting the connector. Repeat these steps for the four remaining connectors. And then select next.

Removing The SG Sensor