CLINITEK Novus® Automated Urine Chemistry Analyzer Competency Checklist

CLINITEK Novus® Automated Urine Chemistry Analyzer Competency Checklist Once an employee has acquired the necessary knowledge and skills to perform basic operation tasks this checklist can be used to observe the employee perform the required tasks for their core job responsibilities and to document demonstrated competency. The observer places their initials and date beside the task when it is performed successfully. Successful completion for each task is determined by the facility. The standards used to evaluate can be documented in the “Criteria” section below. Use the area on the last page to record comments or areas of improvement. If necessary, the observer can record recommended next steps of action for areas of improvement or development opportunities. When all required tasks are completed, the supervisor and employee sign and date this document as a record of completion. Criteria - Standards for successful completion of each task (e.g. Accuracy, Time, Quality, etc.): Observer’s Initials and Completion Date Topic/Tasks System Overview Locate and identify the function of the system components Navigate the system software Sample Processing Identify the steps to prepare the system for running samples Identify the steps to prepare the samples Run patient sample on the rack handler and STAT holder Locate, review, and print the patient results Calibration Prepare the system for calibration Prepare the calibration materials Identify the steps to perform calibration Locate and review the calibration report Quality Control Identify the steps to prepare the controls Perform a QC run on the system Review and print the QC results Maintenance Perform the daily maintenance tasks Describe the periodic maintenance tasks Describe the as needed maintenance tasks Quality # HILS1929 Effective Date: 06/09/2017 Page 1 of 2 SIEMENS Healthineers siemens.com/healthineers CLINITEK Novus® Automated Urine Chemistry Analyzer Competency Checklist Comments Areas of Improvement Next Steps  Primary Operator  Secondary Operator has been trained on the above documented tasks Supervisor: Employee: Date: Quality # HILS1929 Effective Date: 06/09/2017 Page 2 of 2 SIEMENS Healthineers siemens.com/healthineers