Performing a Quick or Full Urinalysis Strip Test Job Aid

Urinalysis Strip Test Performing a Quick Test 1. Select Strip Test 2. Adjust test table for strip tests 3. Select START • Dip the reagent strip into the urine sample, wetting all pads. Immediately remove the strip • Drag the edge of the strip against the side of the sample container as it is removed • Blot the edge of the strip to the paper towel • Place the reagent strip in the table channel, pads facing up. Slide the strip to the end of the channel 5. The test table and strip will automatically be pulled into the analyzer CLINITEK Status"+ 6. When complete, remove and dispose the test strip per laboratory procedure SIEMENS GPE15004.033 Effective Date: 02/14/2014 Urinalysis Strip Test Performing a Full Test 1. Select Strip Test 6. Select Appearance • 2. Select Last Operator or Enter New Operator ID Select Yellow and Clear or Other Use the touchscreen to enter the information • Select a color and clarity. Select Next to • and select Enter to continue continue 3. Select Recall Patient or Enter New Patient 7. The test table and strip will automatically be • Select previous patient or enter new pulled into the analyzer information using the touchscreen. Select 8. When complete, remove and dispose the test Enter to continue strip per laboratory procedure 4. Adjust test table for strip tests 5. Select START • Dip the reagent strip into the urine sample, wetting all pads. Immediately remove the strip • Drag the edge of the strip against the side of the sample container as it is removed • Blot the edge of the strip to the paper towel • Place the reagent strip in the table channel, pads facing up. Slide the strip to the end of the channel GPE15004.033 Effective Date: 02/14/2014