Setting Up Miscellaneous Instrument Features Video

While the startup wizard sets up functions to get started on the analyzer, you may need to customize those settings to meet the requirements of your workplace. To begin, click instrument setup. Diagnostics list tests which can be conducted. Conduct these tests only when instructed by your Siemens representative who will assist you with these procedures. System information contains details of the current configuration. Click select. The initial screen displays the serial number of the analyzer and software version information. Click system configuration to view specific details. These screens list all options which can be changed within input. An instrument settings screens. Click done to return to the Choose Settings screen. If you are located outside the US, you will have the option to select enable the sample interference notes feature. This feature is not available in the US. Click done to return to the main screen.

u System Information Select Choose Settings Language Settings System Configuration Ready 4:.01PM 09-08-2009 4:01PM 09-08-2009 4:50PM 09-10-2009 09-108-2009 09-08-2009 oo.oo.oo.oo.oo.oo A Instrument Recall Results Language Settings Siemens Language........................................English Device Name............................................. Operator Name....... Use Report Header............... .. Print Operator Name........ Port number............... Print Operator Name....... „ „ QC test prompts................. PLO............................ PRO.... ..... ..... ..... .. Further tests....................... Keytad priority.................. IEEE 802.1 X............. Devicme Name..............................................1 Date Format:............. NIT. .... ..... ..... ..... MAC address MAC address... Custom color 1 . . Disabled . Enabled Enabled to set U Set Password Serial Number: SIMOI 360 Power Keypad priority.................. Keypad priority........................... Numeric QC test prompts................. Strip lot Disabled Print Color.................. Print Color.................................... Enabled Print Comor. Nme....................... Enabled Customnfor..tion................... nabled NIT. .... ..... ..... ..... Number of levels to complete QC test 2 Type of prompt................. .........Required Type of prompt........... BLOUt 2.............................. MAC address............. Subnet mask.... .... Subnet mask.... . Suit 2.............................. — . .000.000.000.000 . 255.255.255.000 .255.255.255.000 . Disabled ........DuiSdbIed Operator and Patient information Printer...................................... Automatic Printer...................................... Antomatic Patient Name.................................... Enabled Printer...................................... Antomati PaO...................... Mark Positive Results....................... Line........................................................ 1 Print Enabled PRO...a. ..... ..... ..... ..... .................. .. NIT.... .... ..... ..... ........... ................ Test Days QC pass or fail determined b•nstrument IP address............. WEP key index............... Port number............... WEP key index......................................... 1 LEUt.............................. PC name................................................... Port number............. . Custom coelor 4......................................... Furtoe testr...................... 2049 . 2049 Enabled .Enabled No QC Test QC rest Date and Time Settings Software version Sound............................. Sound on Parityge........................................English Baud rate.................................... . Sustore Seriald........................................... No PrtienterD...................................... Antomati Use printer................................... Internal GLU...................... Lhine........................................................ 1 Shift 2..................................................... 22 Time Format:................... WPA encryption............................ Comms protocol......................... „ IP address..... .. Custom color 4........................ Keytad priority.................. IP address.......... QC „ . Enabled . POCTI NO Clinitek Statuso: 0.060.036 Test sequence number Uplowad.......... Use bar code reader only..........DisabIed Upload.......... Plus System............... Plus Systeme................................ Disabled BILO.a.......................................... Intiernalor Notes............................... Enabled BLOUt......... ..... ..... ..... ..... . LREUt 2......... ..... ..... ..... ..... . Number of levels to complete QC test 2 IP configuration................. Gateway.......... Port number.... ..... .... ..... ..... ...... Port number.... ..... .... ..... ..... ..... Custom Information................... Disabled Password Required..................... Disabled — DHCP Ensabled . Disabled Enabled 2049 DHCP No Instrument Settings Connector: 0.6.0.0 Baud rate.................................... . Units Selection................... Conventional Number of Shifts................. Number of Shifts................................... 3 Test Days Print Serat Name.................... Enabled Shvift 3........................................... ......6 22 Connectivity Platform................. Enabled Device Time Format:................... Gateway address... Device Name.................. Comms protocol......................... „ Comms protocol.................... . — POCTI — POCTI .5?600 Cassette Test Cassette Strip Test EK Last Operator's Name displayed)isabled Restore Default Settings Parity Time Format:........................... „ Print Custom Info.........................EnabIed Print Comient Infor.ame....................... Enabled Customnfor..tion................... nabled QC test prompts................. QC test prompts.........................DisabIed QC test prompts....... QC test prompts........... Shift 1 6 Dayrs................................... Hours ..... ..... ..... ...... IP address IP configuration.................... Furtoe testr...................... . 000.000.000.000 — DHCP ......EnabIed 12 Hour No Diagnostics stop Bits................................................. 1 Line........................................................ 1 Sample Appearance..........................None Port number............... Date Format:............. PaO...................... Type of prompt.......... Type of prompt.................. ......Required Type of prompt................. MAC address....... „ IP address..... .. Device Gateway address... Gateway......... — . .000.000.000.000 . 000.000.000.000 oo.oo.oo.oo.oo.oo ......DisnabIed ........DisnabIed ......Required ........Disabled . Disabled Dia nostics Custom Information................... Disabled QC test prompts.........................Disabled Sample Interference Notes Sam le Interference Notes Irinternal Notes.............................. Enabled Custom Infor..tion................... nisabled pH Enabled QC pass or fail determined b•nstrument Numbher of Shifts.................................... 3o Authentication.................... Open system Subnet mask..... „ Subnet mask. Subnet mask.. IP address............. Authorized operators only........Disabled Use bar code reader only..........DisabIed Authorized operators only........DisabIed Notes......... Enabled .255.255.255.ooo System System Information u System Information . Disabled Sample Interference Notes Operator Name............................. Enabled Optierator Name................................ Enabled Custom Field................................................ 1 Use Report Header..................... Disabled Print Sperialtor Number...................... Enabled Custom Field.................................... Print Sperialor Number...................... Enabled Line 2.........................................................8 PRO... ..... ..... ..... ..... ..... ................ . Further tests........................................ No QC test prompts.........................Disabled Print Patien Nme....................... Enabled Shift 1 6 QC PC name.......................... BLEUt.............................. MAC address... Custom color 1 MAC address..... „ . . Enabled . Enabled Sam le Interference Notes Done System Print Copy Print print Copy Select select Done Confi uration set U