PEPconnect

Creating Reference Lines on a Topogram

Creating Reference Lines on a Topogram 

Creating Reference Lines on a Topogram Computed Tomography 1. The steps below create axial reference lines on a topogram image for any given axial series when Auto reference lines are not enabled. Patient Model Auto reference lines None Dialog setting for reference lines not enabled appears to the right. 2. With the exam loaded in the Exam card, use the ThoraxRoutine (Adult) LEFT mouse button to select the series you wish to use to create reference lines. Topogram CAP 3. Continue holding the LEFT mouse button. Drag and drop the series onto the topogram. If two topograms were taken, display the desired topogram in the upper left segment of the Exam card to begin this step. 4. After dropping the series onto the topogram (release the mouse), reference lines display on the image. Series number / image number are now visible on the topogram. 5. For each series used to create reference lines on a topogram, additional corresponding topograms are automatically created and found in the patient's folder in the database. SIEMENS siemens.com/healthineers Healthineers . Job Aid | Creating Reference Lines on a Topogram Effective Date: 8/15/2016 | Quality 506 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright @ Siemens Healthcare GmbH ...... ........... Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Siemens Healthineers Services Page 2 of 2

  • as
  • flash