CT Checkup and Quality Video

Uient Applications Edit Yiew Seu Image Qpbons System Help eaient Applications Edit Uient Applications Edit Yiew Uient Uient Applications Edit Yiew Image Qpbons System Help eatient Applications Edit Uient Applications Edit Uient Applications Edit Yiew Image eaient Applications Edit Yiew eaient Applications Edit Insert Yiew Seu Image Qpbons System Help eaient Applications Edit Insert Yiew Image Qpbons System Help 2atient 2atient Applications Edit Insert Yiew Seu Image Qpbons System Help eatient Applications Applicrations verification Applfications Applications Witles Qptjons Edit Insert Insen Yiew Yiew Image Qpbons S-ieu Image Qpbons Yiew Seu Image Qptions Y-iew Image Qpbons Seu Image Image Qpbons System Help SEstem Eelp System System Eelp System Help SEtem Eelp Qpbons Qptjons n ons Db ons nb ons Qpbons System Help Qpbions System System Help Help ent eatient Assurance patient SIEMENS SIEMENS CT 6•V_ Applicrations Calibration, SIEMENS SIEMENS osmtn020 osmn020 SIEMENS Study Date Today Category Calibration Database: Local ROT 2 ROT ROT 5 ROT 9 ROT 13 ROTII ROT 19 ROT 18 System U;) Time 3 Hours .40.5 SIEMENS 2 patents found on the system Stud/ dates: 2 patents on the system Stud/ dates Auto eatient patient c patient 10 Most Rec.e. C T Lung "Checkup". Checkup Extrinsic Image please run checkup procedure best Image please run checkup procedure Image quart,' please run checkup procedure V _ 0.0 kcts/s the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest Please leave the scan room CT Checkup The will tilt back the position and The gantry will back zero position and Daily Quality Check The gantry will tilt back the position The gantry will tilt back the position and The gantry will tilt back the zero position and The gantry will tilt back zero position and The gantry will tilt back thero position and The gantry tilt back zero position and The gantry will tilt back zero position The gantry will back position and the move t the the move Out the the move Out the gantry the move the gantry the move Out the gantry' Intrinsic Extrinrsic Extrinsic Head Head X-rays will be produced during the checkup prUedLr@ X-rays will be produced during the checkup procedwre X-rays will be produced during the checkup prUu:edLjr@ Yvravs will be produced during the checkup Yvravs will be produced during the checkup procÆedLjre Yvrays will be produced during the checkup prcedLjre Yvravs will be produced during the checkup prcÆedLjre Yvravs will be produced during the checkup prUedL;re X-rays will be produced during the checkup procedure Yvravs will be produced during the checkup procnedure Yvravs will be produced during the checkup procedure Alignmem Alignmen_ Position In the gantly center vertical freight to mm Set vertical height to Set vertical table height to mm 'Phantom position "Phantom position corraeterJ •Phantom position -Phantom position check" In the gantly center Position slice phantom in the ganuly center Position slice phantom in the ganuy ceru Click OK reaw Function -Phantom position check" Function Thantom position check' stated *hantom position check" stated Repeating last scamrr Repeating last Repeating last scam Function Corse" started Function "Quality •oise'• started Finction "Quality Noise" started Function "Quality Noise" started Function staled Set vertical table height, to mm8 Function Thantom position check' completed Function *hantom position check' stated Press START key to start the scam Function -Phantom position check" completed, Position slice phantom in the ganuy cerær Position slice phantom in the ganuy cerur SIEMENS . -Phantom position check" TPhantom position check" stated -Phantom position Check" -Phantom position check" stated k Results in Results in Set vertical height to Press start the scam Repeating scan Repeating last scan. Repeating last Repeating last scan r Repeating last scan Press star the scam Automatic in Automatic •n in In •n Set vertical height to Set vertical table height to mm Repeating last Repeating scan Set vertical table height to Ok OK -Phantom check" Help Intnrrsic last scan _ last sr_err Start scam Please wait Please Clack Ok *hen Function -Phantom position check" completed Function OQualityt•loise'• started Quart,' Noise Results in tolerance Function "OualityHomogeneit•v• started Function "Quality Noise" started F inction "Quality t•loise'• started Reweating last F inction started F inction "Ouali9t•loise'• started Rev:eating last Click Ok Results In tolerance Noise Results in tolerance TPhantom position check" started *Phantom position check" stated Function *hantom position check' stated "Phantom position check" stated Function Thantom position check' stated -Phantom position check" Fction "OualityHomogeneit•v• started Results in tolerance completed Caplibrcations Caplibrations Calibrcation Calibrati0_ verifications kV130 Function completed -phantom position check' completed *Phantom position check" stated -phantom gn)sition check' stated -phantom position check' stated last scan Results in tolerance Results In tolerance Results completed 140 150 109 start scan last scan Function "Cneckup" staled Press START stal scan Current = Function "Filament adaptation" start scan last scan _ Function -Phantom position check' Function -Phantom position check" completed -Phantom position check" Repeating last scan Repeating last scamv Reveating last scam Repeating last Repeating last scam Press start scan started Fuution "Filament adaptation" staled Current temperature = 631K last scan _ last scarv OTOO Function Corse" started Function "Qualityt•loise'• started Repeating last scanv Function "Quality •oise'• started Repeating scan "Qualityt•loise'• started Function Oualityt•loise'• started "Phantom position check" completed Check Results in tolerance Results in tolerance Results tolerance Current tube "Oefectlve Channels Correction" completed, start scan Current tube = Press th "Calibration" Stattedv Correction" started. COR 180 coq 180 180 cop Current tube temperature = 818K Current tube temperature = Current temperature =09K Current - Repeating last scan._ last scan- last scan _ last scam- Total mAs Total mAs: Current tube temperature = 646K gunction "Defective Channels Correction" Repeating last scan m Repeating last Repeating last scan._ adaptation" 110kV. large' 100 rnA 1000 s. 3*40 mm focus large. 120 1 s. 314 Omm large. s. mm Current tube temperature = 6181K Current temperaturé = 646K Function Correction" staffed Function Corse" started Reveating last scam_ Function Chennels Correctiort• completed Function Channels Correctiort• completed Function "Calinreticn• stalled Repeating last MHR Il In ORV. focus large 160 1500 3*40 mm 110 kV: focus large: 200 mAs: 1000 s: mm 110 focus large: 160 mA: 1000 s: 6<20 mm 110 focus small: 160 1000 s: mm 110 kV. focus large: 160 mA: 1 000 s: 6x10 mm 130 kV. focus small. 130 ILIOO s: 5 mm focus small. 158 1000 3010 mm Cancel COR Cross Ca Press th SIEMENS Cancel Category Stage: Carefully pivot the PHS back and avoid' collision with the detectors. CT Bratn Position Inser€the CT phantom holder into the pallet. 'Daily Quality Check If it fails s "OK" to complete.— elect "Checkup". RT key to start the scan. Press ST Press th Press Pre ress Y. eoe 000 hading... bading.„ hading.. , PNP Device Mounted PNP Device Mounted - Total PNP Mounted - Total Automatic checkup procedwre completed Automatic checkup procedure completed successfulty, Automatic checkup procedwe completed Automatic checkup procedwe completed successfully, Automatic checkup procedwe completed successfully. Automatic checkup procedwe completed successfulty, Automatic checkup procedure completed Automatic checkup procedure completed successfully, checkup procedwe completed - Total Total 05/07/2020 05/07/2020 1