Editing Multiple Orders on the Atellica® Solution Job Aid Version 1.25 and Below

Atellica® Solution SIEMENS Editing Multiple Orders Job Aid Healthineers This feature is used to add or delete tests or delete orders from a Atellico" Solution Version 1.14.0.2951003 SP0010 range of orders. 1 System Samples 2 Inventory Calibration OC Patient Orders Workbest Maintenance Setup Create Patient Orders Create Batch Order by Rack Create Batch Orders by SID Edit Multiple Orders View Batch Orders 1. At the Command Bar, select Patient Orders Functions Test Selections Enter test names, separated by commas. Delete Orders 3 Search 2. Select the Edit Multiple Orders tab Add or Delete Tests Orders Range of Orders X Test System Test Options/ 3. In the Functions area, select either: 4 Sample ID SCHG-151 + X CEA Specify Range By Number of Samples Delete Orders – all orders for samples within the defined 5 Number of Samples 10 • range of samples will be deleted • Add or Delete Tests – the selected tests will be added to all samples within the defined range of samples 4. Enter the Sample ID for the first sample in the range 5. Select an option in the Specify Range By dropdown list and enter the appropriate value: Perform • Number of Samples – the range is defined by a specific ? LabManager Thursday, May 10, 2018 8:30 AM number of samples • Last Sample ID – the range is defined by the beginning and ending Sample ID *This procedure is continued on the next slide 1 Template Effective Date: 05/27/2019 | HOOD05162003010284 Effective Date: 23-DEC-2019 | HOOD05162003056608 Unrestricted © Siemens Healthcare GmbH, 2020 Atellica® Solution SIEMENS Editing Multiple OrdersJob Aid Healthineers 6. If Add or Delete Tests was selected in the Function area, Atellico" Solution Version 1.14.0.2951003 SP0010 select the test to be ordered or deleted in the Test Selections System Samples Inventory Calibration OC Patient Orders Workbest Maintenance Setup area of the screen Create Patient Orders Create Butch Order by Rack Create Batch Orders by SID Edit Multiple Orders View Batch Orders Functions Test Selections 7. Select Perform 6 Enter test names, separated by commas. Delete Orders Search Add or Delete Tests Orders Range of Orders X Test System Test Options/ Sample ID SCIAG-151 + X CEA Specify Range By Number of Samples Number of Samples 7 Perform ? LabManager Thursday, May 10, 2018 8:30 AM 2 Effective Date: 23-DEC-2019 | HOOD05162003056608 Unrestricted © Siemens Healthcare GmbH, 2020 SIEMENS Healthineers Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Atellica, and all associated marks are trademarks of Siemens Healthcare Diagnostics Inc. or its affiliates. All other trademarks and brands are the property of their respective owners. Product availability may vary from country to country and is subject to varying regulatory requirements. Please contact your local representative for availability. Copyright © Siemens Healthcare GmbH 2020 Global Siemens Healthineers Headquarters Henkestr. 127 91052 Erlangen, Germany Phone: +49 9131 84 0 siemens.com/healthineers 3 Effective Date: 23-DEC-2019 | HOOD05162003056608 Unrestricted © Siemens Healthcare GmbH, 2020