Editing the Header File

Editing the Header File Biograph mCT and Horizon Description: This step by step procedure will assist the user in editing the header file of PET sinogram using the Sinogram Header Editor. 1. Open the Patient Browser. 2. Locate the Patient/Study/Series you wish to modify. 3. Highlight the Series. The instances will appear in the Information window at the bottom of the Patient Browser. 4. Highlight (single click) the PET Raw Data instance PET WR Leca Catioace STRETCT A PET RaCas Schaar NUKESH122 PETPETCT AC.) AC_CT --- Paw Dues NOFM --- SCATFRAC Snpsse, Bary 15:29-07 5. Click on Sinogram editor icon or select Edit àSinogram Editor SIEMENS siemens.com/healthineers Healthineers . Editing the Header File Effective Date: 02/26/2018 | Quality HOOD05162002809352 6. The available parameters that can be edited are white. Edit the desired parameters and click OK to apply it permanently in the database. Sinogram Header Edit X Sinogram Header Sinogram Intorfile Header Positioning Zero Bed Position | 462 50 (mm) Bed Horizontal Position 1376:00 (mm) Bed Vertical Position 100.00 (mm) Bed In 10 Gantry Offset X 0.00 (mm) Gantry Offset Y 10.00 (mm) Gantry Offset Z 775.00 (mm) Roll Angle X 0.00 Roll Angle Y 0.00 Roll Anige Z |0.00 SUV Radiopharmaceutical FDG Radioisotope F Injection Time |16.30.00 Injection Date |30-Sep-2008 Injected Dose (mCI) Patient's Weight 123,02 (lbs) View Sinogram OK Cancel Apply 7. You must reload data to Examination Task Card to reprocess data in the PET raw data with the new parameters applied. Siemens Healthineers Services Page 2 of 3 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instruc- tions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety infor- mation like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright © Siemens Healthcare GmbH ………………………………………………………… Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Published by Siemens Healthcare GmbH © Siemens Healthcare GmbH, 2018