Editing View Names Using the DICOM Toolbox Activity

Editing View Names Using the DICOM Toolbox Activity Description: The purpose of this step by step is to assist you in editing the view names of a static or whole body series. 1. Select the desired static or whole body series from the MI Apps Patient Browser and launch the DICOM Toolbox workflow. 2. Select the DICOM Toolbox activity and click the Settings tab. 3. Check the Edit View Names checkbox and deselect any other checkboxes. Settings |View Name General Remove Uniformity Correction Matrix (Applies only to NM images) Edit View Names (Applies only to Static and Wholebody NM images) Tomo Single Detector Representation (Applies only to Tomo and Gated Tomo images) PET PET to NM Representation (Applies only to PET images) Data Path Configuration 1st Data Path WHOLEBODY 6th Data Path STATIC 2nd Data Path STATIC 7th Data Path STATIC 3rd Data Path STATIC 8th Data Path STATIC 4th Data Path STATIC 9th Data Path STATIC 5th Data Path STATIC 10th Data Path STATIC SIEMENS www.usa.siemens.com/healthcare Page 1 of 2 1384 Effective Date: 12/07/2016 4. Select the View Name tab. 5. Select the Series Type (Static or WholeBody) 6. Select the image as to which label you want to update and click on it so that it’s highlighted in red. 7. Type the new label in the View Name field. 8. Click Update to save the label. Settings View Name Delays 01/18/2008 100 100 100 Select image in display box so it's bordered in red O Anterior Posterio RLAT 100 LLAT Al Images Series Type . Static WholeBody View Name: Anterior Update Type the new name in the View Name box Click Update 9. Repleat steps 5 through 8 for the remaining images and complete the workflow. SIEMENS www.usa.siemens.com/healthcare Page 2 of 2