PEPconnect

How to Create 3D Curved Ranges

How to Create 3D Curved Ranges step by step

How to Create 3D Curved Ranges Computed Tomography 3D Curved Ranges allow volumetric data to be reformatted as a series of images that follow the path of a curved or tortuous object, like a vessel or other structure. 1. From the Patient Browser, load an appropriate data set into the 3D Task Card. It is recommended to use thin-sliced data with a 50% overlap for best results. 2. To create a Coronal, Sagittal or Oblique range, use the existing Axial data as a planning base. Click in the Axial segment to make it active (active segments will be displayed with a bold border). 3. Enable Curved Ranges by clicking the Curved Ranges icon. 4. Define the desired image thickness and distance between images. Coronal 3x3 mago thickness 330 Distance between images 30 mm Number of images 19 Start Heb SIEMENS siemens.com/healthineers Healthineers Job Aid | How to Create 3D Curved Ranges Effective Date: 8/16/2016 | Quality HOOD05162002131672 5. Using the mouse, draw the desired path through the anatomy of interest. This can be done as one continuous line, or a series of smaller connected segments. It is possible to scroll through the image stack and click in other images if the anatomy is not displayed on one slice. Double-click to end the drawing. 6. Click Start on the dialogue box. A preview of the images created will populate in segment 4. 7. If the resulting images are satisfactory, click Save As to save images as a new series to the Patient Browser. Siemens Healthineers Services Page 2 of 3 Job Aid | How to Create 3D Curved Ranges Effective Date: 8/16/2016 | Quality HOOD05162002131672 Please note that the learning material is for training purposes only! For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively "Operator Manual") issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions. Note: Some functions shown in this material are optional and might not be part of your system. Certain products, product related claims or functionalities (hereinafter collectively "Functionality") may not (yet) be commercially available in your country. Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Copyright @ Siemens Healthcare GmbH ...... ........... Siemens Healthineers Headquarters Siemens Healthcare GmbH Henkestr. 127 91052 Erlangen, Germany Telephone: +49 9131 84-0 siemens.com/healthineers Siemens Healthineers Services Page 3 of 3

  • as
  • flash
  • emotion
  • open
  • spirit