PEPconnect

POCcelerator™ Client System Overview Online Training

System Overview includes logging into the software, navigating the main screens and understanding the status bar with POCcelerator™ Client.

Welcome to the POCcelerator™ Data Management System Software Overview Online Training course. POCcelerator software provides the IT solution for managing Point of Care (POC) Testing, independent of device manufacturer, by utilizing the following features:   Single interface   Integrates POC devices of all manufacturers in an open and centralized location   Compatible   Bi-directionally links to Laboratory or Hospital Information Systems (LIS or HIS) and other hospital electronic medical platforms     Process  management tool    Manages POC devices, results, users, reagent and quality control (QC) centrally   Upon successful completion of this course, you will be able to: List the log in steps Describe and navigate POCcelerator screens and menu bar Recognize and explain the status bar Congratulations. You have completed the POCcelerator Software Overview Online Training course. Listed below are the key points that have been presented. Take time to review the material before you proceed to the final quiz. POCcelerator Log In Steps Start POCcelerator software from the Start menu or select the corresponding desktop icon Enter User ID and Password Select Ok Current name and ID of logged in user is displayed in the status bar on the main window POCcelerator Screens Result Monitor QC Monitor Process Monitor EQA Monitor Result Monitor Overview Displays all patient results in chronological order Key areas: Detail fields Error log Result table Checking and editing measurement results buttons Patient results menu bar   QC Monitor Overview Responsible for the interpretation and illustration of all incoming QC results of all online connected devices Consists of two screens: QC Chart screen: displays all formally correct QC measurements in graphical or tabular form Incomplete QC data: displays all incomplete or erroneous QC measurements in table form (whether valid or invalid with regard to the lot's valid range)   Key areas: Quality Controls menu bar QC Chart key areas: Selection Criteria QC Chart buttons Incomplete QC Data key areas: Detail fields Error log Result table Re-checking and deleting QC results buttons   Process Monitor Overview Responsible for monitoring all online connected devices Key areas: Overview of devices Device information Device status information Filter options Display Status information   EQA Monitor Overview Additional module that can be purchased from your local Siemens Healthineers representative. It proactively manages and summarizes all the relevant data for both analyzer EQA and user EQA (proficiency testing)   Menu Bar File View Setup Extra Info   Status Bar Red signal light: displays QC violations that have not yet been commented Yellow signal light: displays commented QC violations that have not yet been followed up by valid measurements Green signal light: shows that there are no QC violations or that after each commented QC violation a valid follow-up QC result was measured   To start and log in to the POCcelerator software: Start POCcelerator software from the Start menu or select the corresponding desktop icon Enter User ID and Password Select Ok Current name and ID of logged in user is displayed in the status bar on the main window   Note: POCcelerator software can also be started with windows authentication. User ID must be identical to the windows login. Start POCcelerator software and after three seconds the user is automatically logged in to the software. Activate feature in Setup > User. The status bar is responsible for the representation of QC measurement status and is visible on every POCcelerator screen. Red signal light Displays QC violations that have not yet been commented Double clicking on the red light opens the next uncommented measurement series in the QC Monitor   Yellow signal light Displays commented QC violations that have not yet been followed up by valid measurements. A valid follow-up measurement is a QC measurement within the QC limits, which has been measured with the same model, device, analyte and level Double clicking on the yellow signal light opens the next QC graph where the last result is yellow in the QC Monitor   Green signal light Shows that there are no QC violations or that after each commented QC violation a valid follow-up QC result was measured   By default POCcelerator software consists of three screens Result Monitor, QC Monitor and Process Monitor with the additional option to purchase a license for the External Quality Assurance (EQA) Monitor. Screen Explanation    Result Monitor                        Displays all patient results in chronological order  QC Monitor Responsible for the interpretation and illustration of all incoming QC results of all online connected devices. Manually entered QC results of offline devices are interpreted as well    Process Monitor            Responsible for monitoring all online connected devices  EQA Monitor         An additional module that can be purchased from your local Siemens Healthineers representative. It proactively manges and summarizes all relevant data for both analyzer EQA and user EQA (proficiency testing) POCcelerator Screen Overviews Learn about POCcelerator screen features. Instructions:Flash File:/content/generator/Course_90018806/sim_POCcelerator_SoftwareOverviewOLT_ScreensOverview_850x718_2/sim_POCcelerator_SoftwareOverviewOLT_ScreensOverview_850x718.htmHTML5 File:/content/generator/Course_90018806/sim_POCcelerator_SoftwareOverviewOLT_ScreensOverview_850x718_2/index.htmlPDF File: Please note that the learning material is for training purposes only!   For the proper use of the software or hardware, please always use the Operator Manual or Instructions for Use (hereinafter collectively “Operator Manual”) issued by Siemens Healthineers. This material is to be used as training material only and shall by no means substitute the Operator Manual. Any material used in this training will not be updated on a regular basis and does not necessarily reflect the latest version of the software and hardware available at the time of the training. The Operator's Manual shall be used as your main reference, in particular for relevant safety information like warnings and cautions.   Note: Some functions shown in this material are optional and might not be part of your system.   Certain products, product related claims or functionalities (hereinafter collectively “Functionality”) may not (yet) be commercially available in your country.  Due to regulatory requirements, the future availability of said Functionalities in any specific country is not guaranteed. Please contact your local Siemens Healthineers sales representative for the most current information. The reproduction, transmission or distribution of this training or its contents is not permitted without express written authority. Offenders will be liable for damages. All names and data of patients, parameters and configuration dependent designations are fictional and examples only. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. POCcelerator and all associated marks are trademarks of Siemens Healthcare Diagnostics Inc., or its affiliates. All other trademarks are the property of their respective owners. Copyright © Siemens Healthcare GmbH Published by Siemens Healthcare GmbH ©  Siemens Healthcare GmbH, 2018

  • poccelerator