CLINITEK® AUWi PRO™ System Overview Online Training

CT画質チェックは、CTシステムのキャリブレーションを行うために毎日実施する手順です。 水のCT値がハンスフィールドユニットで較正され、画像のピクセルノイズと管電圧が測定されます。 この手順には、CT画質チェックファントムが必要です。 ファントムのポジショニングとCT画質チェックアップの方法について詳しくは、以下のタブをクリックしてください。 Welcome to the CLINITEK® AUWi PRO™ (Automated Urinalysis Workcell) System Overview Online Training course. The CLINITEK AUWi PRO system: Combines the CLINITEK Novus® Urine Chemistry Analyzer and the Sysmex UF-1000i™ Urine Cell Analyzer through the use of the Track system for sample transport Utilizes the Urinalysis WAM software for data management This course will introduce you to the main components of the CLINITEK AUWi PRO system as well as the sample processing workflow. Select Next to continue. Describe the sample processing workflow on the system   Identify the main components of the CLINITEK® AUWi PRO™ system Upon successful completion of this course, you will be able to: Select Next to continue. Congratulations. You have completed the CLINITEK® AUWi PRO™ System Overview Online Training course. Listed below are the key points that have been presented. Take time to review the material before you proceed to the final quiz. Download and print a copy of the Course Review. Identify the main components of the CLINITEK AUWi PRO system CLINITEK Novus® Urine Chemistry analyzer Sysmex UF-1000i™ Urine Cell analyzer AUWi PRO Track Urinalysis WAM software Describe the sample processing workflow on the system Barcoded samples are loaded into the rack sample loading area Samples are transported to the CLINITEK Novus system for analysis Results from CLINITEK Novus system are sent to the Urinalysis WAM workstation Samples are transported to the Sysmex UF-1000i system for analysis Results from Sysmex UF-1000i system are sent to the Urinalysis WAM workstation Samples are transported to the output queue Select Next to continue. The CLINITEK® AUWi PRO™ system contains four main components: CLINITEK Novus® Urine Chemistry analyzer Sysmex UF-1000i™ Urine Cell analyzer AUWi PRO Track Urinalysis WAM software System Components Learn about the system components. Slide NumberText BlocksCalloutsAudio ScriptImage File1CLINITEK Novus® Urine Chemistry analyzer Dry pad urine chemistry technology Automated urinalysis instrumentation High volume testing Select Next to continue. Note: If audio does not automatically start, select the play arrow in the top left to begin. The CLINITEK Novus system is a fully automated urinalysis instrument designed for high volume testing. This analyzer uses dry pad urine chemistry technology. Select Next to continue.2Sysmex UF-1000i™ Urine Cell analyzer Automated urine sediment analysis Automated bacteria detection Select Next to continue. The Sysmex UF-1000i system is an automated urine sediment analyzer capable of detecting formed elements in urine. Select Next to continue.3CLINITEK® AUWi PRO™ Track Transports samples from the CLINITEK Novus® analyzer to the Sysmex UF-1000i™ analyzer Select Next to continue. The CLINITEK AUWi PRO track automatically transports samples from the CLINITEK Novus system to the Sysmex UF-1000i system.4 Urinalysis WAM software Specialized rules based software Data collection for analysis and reporting When complete, select the X in the upper-right corner to close the window and continue. The Urinalysis WAM software is a specialized rules based program designed to collect data for analysis and reporting. Key steps of sample processing on the CLINITEK® AUWi PRO™ system include: Barcoded samples are loaded into the rack sample loading area Samples are transported to the CLINITEK Novus® system for analysis Results from CLINITEK Novus system are sent to the Urinalysis WAM workstation Samples are transported to the Sysmex UF-1000i™ system for analysis Results from Sysmex UF-1000i system are sent to the Urinalysis WAM workstation Samples are transported to the output queue Sample Processing Learn about sample processing. Checklist TitleChecklist TypeChecklist ContentSamples LoadedHTML Barcoded samples are loaded in the rack sample loading area. Each rack holds up to ten samples and the system can hold a maximum of ten racks for a total of 100 specimens. Select each checkbox to learn more about sample processing. Samples Transported to NovusHTML To initiate processing, the start button is selected on the track.  The first rack of samples advance into place and are transported to the CLINITEK Novus® analyzer. There the barcode is scanned to verify the identity of the sample. The automated pipette will position itself and draw the appropriate amount of sample for analysis. Nine chemistries plus specific gravity, color and clarity are performed using the reagent cassette test pads and SG well. Results Sent to WAMHTML Test results go directly to the Urinalysis WAM workstation. If the results are positive, the workstation flags the sample for appropriate additional testing on the Sysmex UF-1000i™ analyzer. If results are negative, the workstation instructs the Sysmex UF-1000i analyzer to skip that particular sample when the rack arrives. Samples Transported to UF-1000iHTML Samples are then routed to the Sysmex UF-1000i™ analyzer.  Barcodes are scanned and matched with workflow instructions forwarded from the Urinalysis WAM workstation. The pipette lowers into the sample and mixes it thoroughly to distribute sediment evenly before drawing a sample for testing. Once inside the system, the sample is heated to dissolve any amorphous urates and then aspirated into the flow cell for analysis. Flow cytometry cluster analysis provides classification and enumeration of formed elements.  The UF-1000i analyzer identifies ten urine parameters; five of which are enumerated and the rest are flagged. Results Sent to WAMHTML Results from the Sysmex UF-1000i™ analyzer are sent to the Urinalysis WAM workstation where they are combined with the CLINITEK Novus® analyzer results. Samples Transported to Output QueueHTML After the last sample in the rack has been tested by the Sysmex UF-1000i™ analyzer, the entire rack is transported to the output queue to complete the run. When complete, select the X in the upper-right corner to close the window and continue.